Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
Show/hide table
| |
| Illustration 1 | g03435603 |
|
Typical Example | |
Show/hide table
| Callout | Quantity | Part | Specification Description |
| 1 | - | Connecting rod bearings | Refer to the Specifications Module, "Connecting Rod Bearing Journal" topic for information on the connecting rod bearings. |
| 2 | - | Thrust washers | Standard thickness Oversize thickness |
| 3 | - | Main bearings | Refer to the Specifications Module, "Main Bearing Journal" topic for information on the Main bearings. |
| 4 | - | Crankshaft gear | Maximum permissible temperature of the gear for installation on the crankshaft The timing mark is toward the outside of the crankshaft when the gear is installed on the crankshaft. |
Note: The SGI crankshaft cannot be reconditioned. If the crankshaft is worn or damaged, the crankshaft must be replaced
Show/hide table
| Callout | Quantity | Part | Specification Description |
| 5 | - | Crankshaft end play | End play of the crankshaft Maximum crankshaft end play |
| 6 | - | Connecting rod journal | Refer to the Specifications Module, "Connecting Rod Bearing Journal" topic for more information on the connecting rod bearing journals and connecting rod bearings. |
| 7 | - | Main bearing journal | Refer to the Specifications Module, "Main Bearing Journal" topic for information on the main bearing journals and for information on the main bearings |
Caterpillar Information System:
D8T Track-Type Tractor Engine Supplement Vibration Damper and Pulley - Remove and Install
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor
2013/11/26 New Software is Now Used on Certain H Series Wheel Tractor-Scrapers {7620}
PL83 and PL87 Pipelayers Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake)
966M Series XE and 972M Series XE Wheel Loaders Plate Locations and Film Locations
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Piston Pump (Hydrostatic)
Check the Engine Oil Temperature on AD60 Underground Articulated Trucks{1000, 1929} Check the Engine Oil Temperature on AD60 Underground Articulated Trucks{1000, 1929}
H35E S, H35 S, H45E S, H45S, H55E S, H55S, H65E S and H65S Hydraulic Hammers Mounting Bracket - Remove and Install
980H Wheel Loader Machine Systems Hydraulic Tank - Assemble
H35E S, H35 S, H45E S, H45S, H55E S, H55S, H65E S and H65S Hydraulic Hammers Mounting Bracket - Remove and Install
950H and 962H Wheel Loaders Starting Motor - Prestolite Starting Motor - Disassemble
988K XE Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove and Install
950 GC Wheel Loader Steering System Piston Pump (Steering)
986H Wheel Loader Machine Systems Electronic Control (Brake, Hydraulic Fan System)
901C, 902C and 903C Compact Wheel Loaders Machine Systems Bottom Guard - Remove and Install
2013/10/23 New Expansion Tank Group Is Now Used on Certain Pipelayers and Track-Type Tractors {1350, 1353}
844K Wheel Dozer Automatic Lubrication Grease Tank - Fill - If Equipped
980H Wheel Loader Machine Systems Cab - Remove and Install
2013/11/21 New Cushion Hitch Return Lines are Now Available on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers {5057}
901C, 902C and 903C Compact Wheel Loaders Machine Systems Quick Coupler - Remove and Install
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
2013/10/10 An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Alarm - Test