Vibration Damper and Pulley - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 9S-9082 | Engine Turning Tool | 1 |
Start By:
- Remove the front bottom guard.
- Turn the quick disconnect switch to the OFF position.
- Remove the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Replace".
- Loosen bolts (1). Use Tooling (A) to rotate the engine in order to remove bolts (1) .
Note: Leave one bolt (1) with enough thread engagement in order to support spacer (2), damper assembly (3), pulley (4), and adapter (5) to the engine.
Show/hide table
 | |
| Illustration 1 | g01108368 |
Show/hide table
 | |
| Illustration 2 | g01108388 |
Show/hide table
 | |
| Illustration 3 | g01108393 |
- Position spacer (2) and damper assembly (3) against one remaining bolt (1). Install a suitable lifting device to adapter (5). The weight of spacer (2), damper assembly (3), pulley (4), and adapter (5) is approximately 32 kg (70 lb). Remove remaining bolt (1), spacer (2), and damper (3) .
- Remove pulley (4) and adapter (5) .
Installation Procedure
- Install crankshaft vibration damper and pulley (4) in the reverse order of removal .
Caterpillar Information System:
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor
2013/11/26 New Software is Now Used on Certain H Series Wheel Tractor-Scrapers {7620}
PL83 and PL87 Pipelayers Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake)
966M Series XE and 972M Series XE Wheel Loaders Plate Locations and Film Locations
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Piston Pump (Hydrostatic)
Check the Engine Oil Temperature on AD60 Underground Articulated Trucks{1000, 1929} Check the Engine Oil Temperature on AD60 Underground Articulated Trucks{1000, 1929}
H35E S, H35 S, H45E S, H45S, H55E S, H55S, H65E S and H65S Hydraulic Hammers Mounting Bracket - Remove and Install
980H Wheel Loader Machine Systems Hydraulic Tank - Assemble
H35E S, H35 S, H45E S, H45S, H55E S, H55S, H65E S and H65S Hydraulic Hammers Mounting Bracket - Remove and Install
950H and 962H Wheel Loaders Starting Motor - Prestolite Starting Motor - Disassemble
950 GC Wheel Loader Power Train / Electrohydraulic Control Limited Slip Differential Disc End Play - Check
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
988K XE Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove and Install
950 GC Wheel Loader Steering System Piston Pump (Steering)
986H Wheel Loader Machine Systems Electronic Control (Brake, Hydraulic Fan System)
901C, 902C and 903C Compact Wheel Loaders Machine Systems Bottom Guard - Remove and Install
2013/10/23 New Expansion Tank Group Is Now Used on Certain Pipelayers and Track-Type Tractors {1350, 1353}
844K Wheel Dozer Automatic Lubrication Grease Tank - Fill - If Equipped
980H Wheel Loader Machine Systems Cab - Remove and Install
2013/11/21 New Cushion Hitch Return Lines are Now Available on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers {5057}
901C, 902C and 903C Compact Wheel Loaders Machine Systems Quick Coupler - Remove and Install
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
2013/10/10 An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}