Parts In 1P3075 Seal Puller Group Available Separately{0621,1160,1161}
Usage:
The parts in the 1P3075 Seal Puller Group are now available separately through parts service. These parts are:
NOTE: A smaller diameter screw tip is now available. This 5P6521 Screw Tip is used to pull the newer lip-type crankshaft seals, which have very thin metal support walls.
1P3075 Seal Puller Group--See Chart for reference number identification.
5P6521 Screw Tip.
Caterpillar Information System:
1977/05/16 Flare Nut Wrenches Available{0610}
1977/05/16 Use Special Instruction Form SEHS6929 For Repair And Maintenance Information On All Roll-Over Protective Structures (ROPS){7323,7325}
1977/05/16 Stronger Guide Assembly For Oil Level Gauge Used On Caterpillar-Built Engines In Massey-Ferguson Tractors{1300}
1977/05/16 New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16 Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/09 New Fuel Nozzle Assembly Available{1254}
1977/05/09 New Information On Caterpillar Cooling System Inhibitor{1350}
1977/05/09 Improved Air Cleaner Group{1051}
1977/05/09 Shorter Bolts Now Used In Exhaust Manifold Support{1059}
1977/05/09 New Rotor Assembly For Engine Oil Pump Has A Drilled Passage For Better Lubrication Of Oil Pump Bearing{1304}
1977/05/09 Special Torque Wrenches Use Noise As Indication Of Correct Torque Application{0614}
1977/05/02 Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/23 Orifice In Oil Supply Passages Of BrakeSaver Stator Prevent Seal Leakage{1155}
1977/05/23 Install New Plugs To Prevent Oil Leaks At The Oil Filter Base{1306}
1977/05/23 Method Of Piloting Power Generator To Engine Improved{1156,1157,4450}
1977/05/30 New Gasket Used At The Outlet Flange On Heavy-Duty Air Cleaner Group{1051}
1977/05/30 Self Locking Bolts Or Hardened Washers Used In Place Of Sheet Metal Locks{3300}
1977/05/30 Improvements To Aftercooler Water Lines{1063,1380}
1977/05/30 Fabricated Tools For Assembly And Disassembly Of 7271 Marine Transmission{0621,3300}
1977/06/06 Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06 New Tool For Installation Of Tandem Drive Chains On All Series G Motor Graders{0621,4063}
1977/06/06 Water Pump Has Stronger Pulley{1361}
1977/06/06 5P7386 Seal Driver For Hydraulic Pumps And Swing Motor{0622,5058,5070}
1977/06/13 New Adapter Group For Use With Fuel Injection Test Bench{0652}