2013/05/24 Caterpillar


When Replacing The Accumulator or Dryer Replace the Orifice to Improve Air Conditioning Cooling {1808, 7320}

Usage:

236B3 A9H
Integrated Toolcarrier:
IT14G (S/N: FWL1-UP; KZN1-UP)
Mini Hydraulic Excavator:
302.5C (S/N: GBB1-UP)
Compact Track Loader:
259B3 (S/N: YYZ1-UP)
289C (S/N: JMP1-UP)
289C2 (S/N: RTD1-UP)
299C (S/N: JSP1-UP; NMP1-UP)
299D (S/N: GTC1-UP; HCL1-UP)
299D XHP (S/N: NLC1-UP; JST1-UP)
Multi Terrain Loader:
287C (S/N: MAS1-UP)
247B3 (S/N: ESL1-UP; TSL1-UP; KB31-UP)
257B3 (S/N: B7H1-UP)
287C2 (S/N: SSB1-UP)
297C (S/N: GCP1-UP)
Skid Steer Loader:
226B3 (S/N: SNA1-UP; MWD1-UP; AS21-UP)
236B3 (S/N: A9H1-UP)
242B3 (S/N: SRS1-UP)
246C (S/N: JAY1-UP)
252B3 (S/N: TNK1-UP)
256C (S/N: DWS1-UP)
262C2 (S/N: TMW1-UP)
262D (S/N: DTB1-UP)
272C (S/N: RED1-UP)
272D (S/N: GSL1-UP; B5W1-UP)
Compact Wheel Loader:
906H2 (S/N: JRF1-UP)
907H2 (S/N: JRS1-UP)
908H2 (S/N: JRD1-UP)
914G (S/N: PDF1-UP)
914G2 (S/N: KNP1-UP)
IT14G2 (S/N: ERP1-UP)

ReferenceRefer to the Service Manual, SENR5664, "All Products Air Conditioning and Heating R134a for All Caterpillar Machines " for the Specifications, System Operation, Troubleshooting, Test and Adjust, and Disassembly and Assembly of the refrigeration system.




Illustration 1g03377574

The 170-0075 Air Conditioner Gp .

The 7X-2049 Refrigerant Orifice Tube should be replaced when replacing the 186-6190 Refrigerant Accumulator Gp or the 271-7421 Refrigerant Dryer. The Orifice Tube is located in the inlet tube of the evaporator coil. Refer to illustration 1.

Caterpillar Information System:

H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Storage
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Lifting and Tying Down
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Transport Position
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Piston Motor (Hydrostatic)
525D, 535D, 545D, 555D Wheel Skidder Water Cleaning System (Pressurized) - Test
525D, 535D, 545D, 555D Wheel Skidder Water Cleaning System (Pressurized) - Purge - If Equipped
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System ECM Location Code - Test
D9T Track-Type Tractor Operator Controls
525D, 535D, 545D, 555D Wheel Skidder Transmission Oil Sample - Obtain
525D, 535D, 545D, 555D Wheel Skidder Transmission Oil Level - Check
903C Compact Wheel Loader Quick Coupler - Inspect
525D, 535D, 545D, 555D Wheel Skidder Transmission Oil Filter - Replace
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Fill Time for the Transmission Clutch (Electronic Technician) - Calibrate
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Tilt Cylinder
966H, 972H and 980H Wheel Loaders Electrohydraulic System Solenoid Valve - Test
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Speed Sensor - Adjust
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Torque Converter Stall - Test
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Transmission Pressures - Test and Adjust
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Output Transfer Gears - Adjust
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Differential Pinion Preload - Adjust
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Differential Backlash and Bearings - Adjust
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Limited Slip Differential Disc End Play - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.