1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i05329614

525D, 535D, 545D, 555D Wheel Skidder Caterpillar


Transmission Oil Level - Check

Usage:

525D 2L5
Show/hide table
Ilustrasi 1g03383782
Show/hide table
Ilustrasi 2g03383767

  • Buka pintu akses di sisi kiri alat berat.

  • Keluarkan dipstick dan bersihkan dipstick dengan kain bersih. Hal ini akan memastikan pengukuran tingkat oli yang lebih akurat.

  • Masukkan kembali dipstick dan keluarkan lagi dipstick. Periksa tingkat oli. Tingkat oli harus berada di antara tanda pada dipstick saat engine beroperasi pada kecepatan idle rendah dan transmisi berada pada posisi netral.
    Show/hide table
    Ilustrasi 3g03384152

  • Jika tingkat oli rendah, lepaskan pijakan skidder. Lepaskan tutup pengisian oli dan tambahkan oli transmisi melalui tabung pengisian oli, bila diperlukan. Pasang kembali tutup pengisian oli.

  • Pasang dipstick dan tutup pintu akses.

    • Caterpillar Information System:

    903C Compact Wheel Loader Quick Coupler - Inspect
    525D, 535D, 545D, 555D Wheel Skidder Transmission Oil Filter - Replace
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Condition Switch (Two Wire) - Test
    903C Compact Wheel Loader Parking Brake Control - Inspect
    525D, 535D, 545D, 555D Wheel Skidder Transmission Oil - Change
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Alarm - Test
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Differential and Final Drive Troubleshooting
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Transmission Troubleshooting
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Torque Converter Troubleshooting
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Emerging Symptom Information
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Symptom Troubleshooting
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Event Codes
    525D, 535D, 545D, 555D Wheel Skidder Transmission Oil Sample - Obtain
    D9T Track-Type Tractor Operator Controls
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System ECM Location Code - Test
    525D, 535D, 545D, 555D Wheel Skidder Water Cleaning System (Pressurized) - Purge - If Equipped
    525D, 535D, 545D, 555D Wheel Skidder Water Cleaning System (Pressurized) - Test
    259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Piston Motor (Hydrostatic)
    H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Transport Position
    H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Lifting and Tying Down
    H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Storage
    2013/05/24 When Replacing The Accumulator or Dryer Replace the Orifice to Improve Air Conditioning Cooling {1808, 7320}
    966H, 972H and 980H Wheel Loaders Power Train Electronic Control System Fill Time for the Transmission Clutch (Electronic Technician) - Calibrate
    259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Tilt Cylinder
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.