TA22-4WD Agricultural Transmission Caterpillar


Relief Valve (Transmission Lubrication)

Usage:

TA22-M4WD T4W


Illustration 1g01328889
(1) Transmission lubrication relief valve


Illustration 2g00646729
(1) Transmission lubrication relief valve
(2) Spool
(3) Spring
(4) Ports to the transmission case
(5) Passage from the transmission hydraulic control

The transmission lubrication relief valve (1) is located after the relief valve for the transmission hydraulic control. Transmission lubrication relief valve (1) controls the maximum pressure of the lubrication oil that is flowing to the transmission. Lubrication oil for the transmission comes from oil that is flowing through the pressure relief valve for the transmission charging system. When the oil from the transmission charging section of the transmission gear pump reaches the relief setting, oil will pass through the pressure relief valve for the transmission charging system. This oil is then supplied to the transmission as lubricating oil. If the pressure of the lubrication oil in the transmission lubrication relief valve (1) overcomes the force of spring (3), spool (2) will shift. This will allow passage (5) to drain lubrication oil through ports (4) into the transmission case.

Caterpillar Information System:

3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Flash Programming
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Factory Passwords
2006/11/20 Prevent Freezing of the Cooling System During Shipping and Storage {1063}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Sensors and Electrical Connectors
C13 and C15 On-highway Engines Component Location
G3516C, G3516E, and G3512E Generator Set Engines Integrated Temperature Sensing Module - Test
G3516C, G3516E, and G3512E Generator Set Engines Indicator Lamp - Test
G3516C, G3516E, and G3512E Generator Set Engines Ignition Secondary - Test
C15 and C18 Petrolem Generator Set Engines Oil Contains Fuel
G3516C, G3516E, and G3512E Generator Set Engines Turbocharger Compressor Bypass - Test
G3516C, G3516E, and G3512E Generator Set Engines Throttle Actuator - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines System Configuration Parameters
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Noise - Noisy Operation
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Will Not Charge - Charging Problem
2006/12/25 New Software is Used {1902, 7620}
C13 and C15 On-highway Engines Oil Contains Coolant
G3516C, G3516E, and G3512E Generator Set Engines ECM - Replace
G3516C, G3516E, and G3512E Generator Set Engines Generator Output Power Sensor - Set
G3516C, G3516E, and G3512E Generator Set Engines Timing - Calibrate
3500C Marine Propulsion Engines Sensor Signal (Analog, Active) - Test
C13 and C15 On-highway Engines Variable Valve Actuator Response - Test
C13 and C15 On-highway Engines Variable Valve Actuator Oil Pressure - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Can Not Reach Top Engine RPM
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.