Pressure for Transmission Lubrication - Test
Introduction
The following test is used to test the oil pressure of the transmission lubrication.
Required Tools
Show/hide table
 | |
| Illustration 1 | g01089423 |
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tooling | Part Number |
Description | Qty |
| A | 8T-0855 | Pressure Gauge | 1 |
| 6V-3989 | Fitting | 1 | |
| 6V-4143 | Quick Connect Coupler | 2 | |
| 177-7861 | Hose As | 1 | |
Testing Procedure
Show/hide table
 | |
| Illustration 2 | g01704533 |
The pressure for the transmission lubrication can be measured at pressure tap (1) on the front of the transmission.
- Install Tooling (A) on pressure tap (1) .
- Start the engine. Warm the oil until the oil reaches 47 °C (116 °F).
- Operate the engine at low idle. Observe the pressure gauge. The transmission lubrication pressure must be within the values that are shown in Systems Operation, Testing and Adjusting, "Power Train Pressures".
- Operate the engine at high idle. Observe the pressure gauge. The torque converter outlet pressure must be within the values that are shown in Systems Operation, Testing and Adjusting, "Power Train Pressures".
Shut off the engine.
Caterpillar Information System:
3500C Marine Auxiliary Engines Timing - Calibrate
3512C Petroleum Engines Customer Parameters Worksheet
3512C Petroleum Engines System Configuration Parameters
3500C Marine Auxiliary Engines Pressure Sensor - Calibrate
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Power Flow
3500C Marine Auxiliary Engines ECM - Replace
3500C Marine Auxiliary Engines Engine Overspeeds
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Speed Sensor (Torque Converter Output)
2006/10/30 An Improved 192-2962 Oil Cooler Core As Is Now Available {1378}
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Warm-up
3512C and 3516C Marine Auxiliary and Generator Set Engines Monitoring System
TH31-E61 and TH35-E81 Petroleum Transmissions Oil Filter (Transmission) - Replace - Drop Box
374F Excavator Window (Front)
C32 Marine Engine Throttle Position Sensor - Calibrate
2006/11/13 Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553} Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
2006/11/06 Improvements to the Water Lines Groups {1380}
C4.4 Marine Generator Set Additional Messages
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages General Information
Caterpillar On-Highway Diesel Engine Fluids Recommendations Distillate Diesel Fuel - Fuel Recommendations for On-Highway Diesel Engines
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Power Train Electrical System
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Modem
Caterpillar On-Highway Diesel Engine Fluids Recommendations Frequently Asked Questions - Ultra Low Sulfur Diesel (ULSD) Fuel
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Model View Illustrations