Camshaft
Show/hide table
图 1 | g02582277 |
典型示例 |
Show/hide table
技术规格 - 283-7639 凸轮轴总成和 285-3785 凸轮轴总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
A | - | - | 新凸轮轴上止推垫圈组件的槽尺寸为 |
C | 2 | 4N-1650 定位销 | 凸轮轴间定位销的延伸长度为 |
D | 2 | 5B-5821 定位销 | 定位销从凸轮轴组件延伸的长度为 |
E | 2 | 7N-3218 止推垫圈 | 新止推垫圈的厚度为 |
F | - | - | 轴承轴颈的直径为 安装后凸轮轴轴承的孔径为 |
- | - | - | 新凸轮轴组件的端隙为 |
1 | 16 | 5P-0076 螺栓 | 拧紧至扭矩为 |
Show/hide table
图 2 | g02582338 |
Show/hide table
技术规格 - 283-7639 凸轮轴总成和 285-3785 凸轮轴总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
- | - | - | 使用以下步骤确定实际凸轮轴凸轮升程:
1. 测量凸轮轴凸轮高度 (H)。 2. 测量基圆 (J)。 3. 从凸轮轴凸轮高度值 (H) 中减去基圆 (J)。 二者之差就是实际凸轮轴凸角升程。 |
G | - | - | 规定的凸轮轴凸轮升程
进气凸轮为 喷油器凸轮为 排气凸轮为 |
Caterpillar Information System:
3500C Marine Propulsion Engines Refill Capacities and Recommendations
2006/10/09 A New Water Temperature Regulator Is Now Available {1355}
2006/10/09 A New Water Temperature Regulator Is Now Available {1355}
2006/10/01 A New Water Temperature Regulator Is Now Available {1355}
3516C Locomotive Engine Product Storage
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Fuel Injection Pump
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Fuel Injection Lines
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Engine Design
3500 Engines Turbocharger
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1406 - FMI 06
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1406 - FMI 05
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 1406 - FMI 03
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Fuel Injection Nozzles
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Lifter Group
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Transfer Pump
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Rocker Shaft
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Valve Mechanism Cover
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Cylinder Head Valves
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Cylinder Head
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Turbocharger
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Exhaust Manifold
C0.5 , C0.7 , C1.1 , C1.5 , C1.6 and C2.2 Industrial Engines Camshaft
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Lines
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Filter