336E Excavator Machine System Specifications Caterpillar


Cab

Usage:

336E L BZY


Illustration 1g03811025
Typical example

Table 1
Item  Qty  Part  Specification Description 
8T-4190 Bolt (1)  Torque to 125 ± 20 N·m (92 ± 15 lb ft)
8T-4191 Bolt  Torque to 25 ± 3 N·m (221 ± 27 lb in)
(1) For 372-9522.


Illustration 2g03811026
Section B-B

Table 2
Item  Qty  Part  Specification Description 
8T-4648 Bolt  Before assembly, apply red Loctite 263 to the threads. 
8T-4179 Bolt  Before assembly, apply red Loctite 263 to the threads. 
8T-4192 Bolt  Before assembly, apply red Loctite 263 to the threads. 

Caterpillar Information System:

993K Wheel Loader C32 Engine Supplement Fuel Heater - Remove and Install
Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 364-7250 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 364-7250 Steel Mill Arrangement {0374, 7000}
906H2, 907H2 and 908H2 Compact Wheel Loaders Engine Starting
962H Wheel Loader and 962H Wheel Loader Machine Systems Air Conditioner Lines
962H Wheel Loader and 962H Wheel Loader Machine Systems Axle Oil Cooler Guard
336E Excavator Machine System Specifications Final Drive and Motor Fastener (Mounting)
336E Excavator Machine System Specifications Coupler Lines
966H and 972H Wheel Loaders Electrohydraulic System Electrohydraulic Control
2012/06/29 A New Torque Converter Wiring Harness Extension is Now Available for AD55B Underground Articulated Trucks {1408, 1901}
D5R Track-Type Tractor MID 039 - CID 0673 - FMI 02
D5R Track-Type Tractor MID 039 - CID 0585 - FMI 02
950H Wheel Loader and 962H Wheel Loader Electrohydraulic System Diagnostic Trouble Codes
D6K2 Track-Type Tractor Engine Supplement Fumes Disposal Filter - Remove and Install
D6K2 Track-Type Tractor Machine Systems Joystick Control (Steering and Transmission)
2012/11/27 A Different Rod Assembly and Piston are now used on the Tilt Cylinder Group on Certain 994 Wheel Loaders {5104}
D6K2 Track-Type Tractor Engine Supplement Alternator - Remove and Install
Installation Procedure for the 980K Wheel Loader Inclined Ladder Field Install Kit{0679, 0680, 1273, 5057, 5147, 7000, 7254, 7960} Installation Procedure for the 980K Wheel Loader Inclined Ladder Field Install Kit{0679, 0680, 1273, 5057, 5147, 7000, 7254, 7960}
834K Wheel Dozer Fuel System Secondary Filters - Replace
988K Wheel Loader Transmission Oil Sample - Obtain
950H Wheel Loader and 962H Wheel Loader Power Train Cat Data Link
Thermal Spray Procedures for D3 - D5G TTT Track Adjuster Yoke Shaft{0679, 4157, 4159} Thermal Spray Procedures for D3 - D5G TTT Track Adjuster Yoke Shaft{0679, 4157, 4159}
Installation of Ripper (S/N: S9A) On D6K2 Track-Type Tractors {6310} Installation of Ripper (S/N: S9A) On D6K2 Track-Type Tractors {6310}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562} Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
2012/04/02 Protection Plates for the Side of the Bowl are Available for Certain Wheel Tractor-Scrapers {6201}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.