A New Torque Converter Wiring Harness Extension is Now Available for AD55B Underground Articulated Trucks {1408, 1901}
- Underground Articulated Truck:
- AD55B (S/N: JNW1-UP)
Description of Change: A new torque converter wiring harness extension is now available. The new torque converter wiring harness extension allows the torque converter wiring harness to be routed away from the exhaust manifold.
Adaptable To: The new torque converter wiring harness extension is adaptable to the following machines.
Show/hide table
| Machine | Adaptable To |
| AD55B | S/N:JNW1-275 |
Show/hide table
| Parts Required | ||
| Qty | Part Number | Part description |
| 1 | 393-5357 | Harness As |
| 1 | 104-6202 | Clip-Ladder |
| 1 | 203-0357 | Cable Tie |
| 3 | 170-0610 | Stud |
| 3 | 6V-8801 | Nut |
| 1 | 116-0118 | Clip |
| 3 | 4K-8864 | Clip-Loop |
| 7 | 8T-4896 | Hard Washer |
| 1 | 5S-7379 | Bolt |
- Disconnect 312-0494 Harness As (1) from 303-3504 Harness As (2) .
Show/hide table
 | |
| Illustration 1 | g02928996 |
Standard harness routing (1) 312-0494 Harness As (2) 303-3504 Harness As (3) Bolt | |
- Remove and discard three bolts (3) .
- Connect 393-5357 Harness As (4) between 312-0494 Harness As (1) and 303-3504 Harness As (2) .
Show/hide table
 | |
| Illustration 2 | g03075136 |
New harness routing (4) 393-5357 Harness As | |
- Route 393-5357 Harness As (4) below the starter motor, using Item (5) through Item (12). Refer to Illustration 3.
Show/hide table
 | |
| Illustration 3 | g03073296 |
New harness routing (5) 104-6202 Clip-Ladder (6) 203-0357 Cable Tie (7) 170-0610 Stud (8) 6V-8801 Nut (9) 116-0118 Clip (10) 4K-8864 Clip-Loop (11) 8T-4896 Hard Washer (12) 5S-7379 Bolt | |
Caterpillar Information System:
D5R Track-Type Tractor MID 039 - CID 0673 - FMI 02
D5R Track-Type Tractor MID 039 - CID 0585 - FMI 02
950H Wheel Loader and 962H Wheel Loader Electrohydraulic System Diagnostic Trouble Codes
D5R Track-Type Tractor Transmission Does Not Shift Into All Gears
D5R Track-Type Tractor Power Train System Pressure Is Low
D5R Track-Type Tractor Transmission Oil Filter - Replace
950H Wheel Loader and 962H Wheel Loader Electrohydraulic System Event Codes
D6K2 Track-Type Tractor Engine Supplement Oil Cooler (Engine) - Remove and Install
D9R Track-Type Tractor Engine Supplement Hood - Remove and Install
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157} Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
D5R Track-Type Tractor Power Angling Tilt Pins-Lubricate
D5R Track-Type Tractor System Schematic
966H and 972H Wheel Loaders Electrohydraulic System Electrohydraulic Control
336E Excavator Machine System Specifications Coupler Lines
336E Excavator Machine System Specifications Final Drive and Motor Fastener (Mounting)
962H Wheel Loader and 962H Wheel Loader Machine Systems Axle Oil Cooler Guard
962H Wheel Loader and 962H Wheel Loader Machine Systems Air Conditioner Lines
906H2, 907H2 and 908H2 Compact Wheel Loaders Engine Starting
Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 364-7250 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 364-7250 Steel Mill Arrangement {0374, 7000}
993K Wheel Loader C32 Engine Supplement Fuel Heater - Remove and Install
336E Excavator Machine System Specifications Cab
D6K2 Track-Type Tractor Engine Supplement Fumes Disposal Filter - Remove and Install
D6K2 Track-Type Tractor Machine Systems Joystick Control (Steering and Transmission)
2012/11/27 A Different Rod Assembly and Piston are now used on the Tilt Cylinder Group on Certain 994 Wheel Loaders {5104}