D3K2, D4K2 and D5K2 Track-Type Tractor Systems Caterpillar


Oil Filter (Winch)

Usage:

D3K2 LGP GAE


Illustration 1g02777876

Table 1
Specification for 346-5576 Oil Filter Gp 
Item  Qty  Part  Specification Description 
Torque for the fitting is 12 ± 1 N·m (106 ± 9 lb in)
Torque for the fitting is 18 ± 2 N·m (159 ± 18 lb in)
349-6097 Pressure Switch  Torque to 35 ± 2 N·m (26 ± 1 lb ft).
Actuation pressure is 345 ± 37 kPa (50 ± 5 psi).
Minimum deactuation pressure is 228 kPa (33 psi).
Contact position is normally closed. 
Torque to 30 ± 7 N·m (266 ± 62 lb in)

Caterpillar Information System:

D3K2, D4K2 and D5K2 Track-Type Tractor Systems Sprocket
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Sprocket
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737} Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
2012/05/28 New Software Is Now Available for D7E Track-Type Tractors {1920, 7620}
924K, 930K and 938K Wheel Loaders Electrohydraulic System Pilot Oil Accumulator (Dead Engine, Lift Arm Lower) - Test and Charge
Custom Product Support Literature for the 380-7254 Steel Mill Ar for the 966H Wheel Loader{0374, 7000} Custom Product Support Literature for the 380-7254 Steel Mill Ar for the 966H Wheel Loader{0374, 7000}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Installing the New Alternator and Starter Cables{1000, 1401, 1402, 1408} Installing the New Alternator and Starter Cables{1000, 1401, 1402, 1408}
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Refrigerant Condenser
988K XE Wheel Loader Specifications
988K XE Wheel Loader Additional Messages
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Air Conditioner Group
924K, 930K and 938K Wheel Loaders Electrohydraulic System Main Control Valve
924K, 930K and 938K Wheel Loaders Electrohydraulic System Main Control Valve
924K, 930K and 938K Wheel Loaders Electrohydraulic System Control Valve (Tilt)
924K, 930K and 938K Wheel Loaders Electrohydraulic System Control Valve (Tilt)
D9T Track-Type Tractor Engine Supplement Electric Starting Motor - Remove and Install
2011/12/22 An Improved Battery Terminal for the Accessory Power Converter Is Now Used for D7E Track-Type Tractors {1421, 7418, 7490}
2012/01/26 A New Accessory Power Converter Instructional Film for the Battery Terminals Is Now Available for D7E Track-Type Tractors {1421, 7557}
924K, 930K and 938K Wheel Loaders Electrohydraulic System Control Valve (Lift)
924K, 930K and 938K Wheel Loaders Electrohydraulic System Control Valve (Auxiliary)
924K, 930K and 938K Wheel Loaders Electrohydraulic System Control Valve (Auxiliary)
924K, 930K and 938K Wheel Loaders Electrohydraulic System Ride Control Accumulator
D9T Track-Type Tractor Engine Supplement Engine Front Support and Trunnion - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.