The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.
Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.
Note: If Cat HYDO Advanced 10 hydraulic oil is used, the hydraulic oil change interval will change. The normal interval of 2000 hours is extended to 3000 hours. S·O·S services may extend the oil change even longer. Consult your Cat dealer for details.
When Required
Engine Air Filter Primary and/or Secondary Element - Clean/ReplaceEngine Air Precleaner - Clean
Ether Starting Aid Cylinder - Replace
Front Idler Position - Check
Fuel System - Prime
Fuses and Circuit Breakers - Replace/Reset
Oil Filter - Inspect
Radiator Core - Clean
Radiator Pressure Cap - Clean/Replace
Window Washer Reservoir - Fill
Windows - Clean
Every 10 Service Hours or Daily
Backup Alarm - TestBrakes, Indicators and Gauges - Test
Cab Filter (Fresh Air) - Clean/Inspect/Replace
Cooling System Coolant Level - Check
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Transmission Oil Level - Check
Every 50 Service Hours or Weekly
Cab Filter (Recirculation) - Clean/Inspect/ReplaceEqualizer Bar Center Pin - Lubricate
Lift Cylinder Yoke Bearings - Lubricate
Track Pins - Inspect
Every 250 Service Hours or Monthly
Belt - Inspect/ReplaceEngine Oil Sample - Obtain
Equalizer Bar End Pins Oil Level - Check
Final Drive Oil Level - Check
Fuel Tank Water and Sediment - Drain
Track - Check/Adjust
Every 250 Service Hours or 3 Months
Pivot Shaft Oil Level - CheckEvery 500 Service Hours
Final Drive Oil Sample - ObtainHydraulic System Oil Sample - Obtain
Transmission System Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - ObtainEngine Oil and Filter - Change
Fuel System Secondary Filters - Replace
Fuel System Water Separator Element - Replace
Fuel Tank Cap Filter and Strainer - Replace/Clean
Hydraulic System Oil Filters - Replace
Recoil Spring Compartment Oil Level - Check
Window Wipers - Inspect/Replace
Every 1000 Service Hours or 6 Months
Battery - InspectRollover Protective Structure (ROPS) - Inspect
Torque Converter Scavenge Screen - Clean
Transmission Breather - Clean/Replace
Transmission Magnetic Screen - Clean
Transmission Oil - Change
Transmission Oil Filter - Replace
Transmission Scavenge Screen - Clean
Every 2000 Service Hours
Fumes Disposal Filter Element - ReplaceEvery 2000 Service Hours or 1 Year
Cooling System Coolant Sample (Level 2) - ObtainFinal Drive Oil - Change
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Pilot) - Replace
Track Roller Frame Guides - Inspect
Every 2000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - ReplaceEvery 2500 Service Hours
Engine Valve Lash - Check/AdjustEvery Year
Refrigerant Dryer - ReplaceEvery 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - ReplaceEvery 5000 Service Hours
ARD Spark Plug - CleanDiesel Particulate Filter - Clean
Fuel Priming Pump - Replace