Aftercooler - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 189-0410     | 钩环组件     | 2     |
- 将工具 (A) 和适当的起吊设备固定到后冷器 (12) 上。 后冷器 (12) 的重量约为 227 kg (500 lb)。 安装后冷器 (12) 。
Show/hide table
图 1 | g01294232 |
- 将螺栓 (14) 和 (15) 安装到后冷器 (12) 上。 安装螺栓 (13) 。
Show/hide table
图 2 | g01294234 |
- 安装螺栓 (11) 。 安装螺栓 (10) 。
Show/hide table
图 3 | g01294215 |
- 在对面重新执行步骤 2 到步骤 3。
- 将软管组件 (9) 连接到燃油冷却器 (7) 上。
Show/hide table
图 4 | g01290939 |
- 将软管组件 (8) 连接到燃油冷却器 (7) 上。
Show/hide table
图 5 | g01290934 |
- 连接底部后冷器管 (6) 。 连接底部散热器软管 (5) 。
Show/hide table
图 6 | g01290930 |
- 连接顶部后冷器管 (4) 。
Show/hide table
图 7 | g01290917 |
- 连接顶部散热器软管 (3) 。
Show/hide table
图 8 | g01290916 |
- 连接底部后冷器管 (2) 。
Show/hide table
图 9 | g01290915 |
- 安装卡箍 (1) 。 对另一侧重复此操作。
Show/hide table
图 10 | g01290908 |
- 向冷却系统加注冷却液。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。
End By: 安装风扇。 请参阅 拆解和组装, "风扇 - 拆卸和安装"。
Caterpillar Information System:
C27 and C32 Generator Set Engines Radiator Core - Install
C13 and C15 On-highway Engines Electrical Connectors - Inspect
C13 and C15 On-highway Engines ECM - Replace
C13 and C15 On-highway Engines ECM Software - Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Modem - Callback
C13 and C15 On-highway Engines Transmission Shift Control - Test
C13 and C15 On-highway Engines Torque Limit - Test
C13 and C15 On-highway Engines Tachometer - Test
C13 and C15 On-highway Engines Starting Aid - Test
3508B, 3512B, and 3516B High Displacement Generator Sets Monitoring System
3612 and 3616 Engines Crankshaft Rear Gear - Remove and Install
3612 and 3616 Engines Crankshaft Front Gear - Remove and Install
C13 and C15 On-highway Engines Timing - Calibrate
C175-16 and C175-20 Engines for Off-Highway Trucks Ether Control System
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover
TA22-4WD Agricultural Transmission Lubricant Viscosities
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover
C280-12 and C280–16 Marine Engines Camshaft Drive Gear - Remove
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Firmware - Update
C13, C15, and C18 Tier 4 Final Engines Fuel Filter Base
C-10 and C-12 Truck Engines Cylinder Liner
C7 Engines for Caterpillar Built Machines Turbocharger
2006/10/02 New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
C175-16 Locomotive Engine General Information (Air/Electric Starting System)