C175-16 Locomotive Engine Caterpillar


Electric Starting Motor

Usage:

C175-16 3A9


图 1g02580117

表 1
276-8882 电起动马达总成技术规格 
项目  数量  零件  技术规格说明 
8T-4244 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (270 ± 31 lb in)。 
319-5247 起动马达电磁阀  20V 和 25 °C (77 °F) 下的耗电量:
1. 吸引绕组为 49.3 ± 3.3 amp。
2. 保持绕组为 6.8 amp。 
小齿轮和壳体之间的间隙为 9.1 mm (0.36 in)。 
5C-2874 螺母  拧紧至扭矩为 2.25 ± 0.25 N·m (20 ± 2 lb in)。 
开关端子必须用热收缩管绝缘。 不要使用模压端子。
8T-4244 螺母  蓄电池接线端螺母 (3) 最多可使用三个电缆接线端或导线接线端。 两个电缆接线端可以等于或高于 0 AWG。 
拧紧至扭矩为 30.5 ± 3.5 N·m (270 ± 31 lb in)
6V-8188 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (270 ± 31 lb in)。 
拧紧至扭矩为 30.5 ± 3.5 N·m (270 ± 31 lb in)。 
当从小齿轮端观看电起动马达时,马达顺时针旋转。
25 °C (77 °F) 时无负载:
1. 转速为 6950 ± 1650 rpm。
2. 电流为 115 ± 25 amp。
3. 电压为 23 V。 

Caterpillar Information System:

2011/07/28 Rack Back Bucket Stops Adjustment on 950H through 972H Wheel Loaders {5104, 6001, 6107, 6119}
994H Wheel Loader Engine Supplement Engine, Pump Drive (Rear), and Torque Converter - Install
994H Wheel Loader Engine Supplement Engine, Pump Drive (Rear), and Torque Converter - Remove
3500 Marine Engines Alternator Mounting
349F and 352F Excavators Machine System Specifications Hydraulic Pedal Control (Auxiliary)
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 3498 - FMI 13
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 3498 - FMI 08
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 3498 - FMI 04
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 3498 - FMI 03
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 3497 - FMI 13
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 3497 - FMI 08
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 3497 - FMI 04
621H, 623H, and 627H Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 3401 - FMI 14
3516B Engine for 994F and 994H Wheel Loaders Sensor Signal (Analog, Active) - Test
994H Wheel Loader Cat Detect Object Detection - If Equipped
621H, 623H, and 627H Wheel Tractor-Scrapers Power Train Electronic Control System Transmission Shifting Function
980K Wheel Loader Machine Systems Piston Pump (Brake, Pilot, Fan) - Disassemble
980K Wheel Loader Machine Systems Piston Pump (Brake, Pilot, Fan) - Assemble
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Operational Checks
D8T Track-Type Tractor Hydraulic System Location of Electrical Components
3516B Engine for 994F and 994H Wheel Loaders Sensor Supply - Test
CG137-08 and CG137-12 Engines Exhaust Bypass - Inspect
994H Wheel Loader Specifications
992K Wheel Loader Display and Camera - Clean - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.