Air Tank - Install
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Use Tooling (A) and a suitable lifting device in order to install air tank (11). The weight of air tank (11) is approximately 147 kg (325 lb). Install bolts (12) .
Show/hide table
 | |
| Illustration 1 | g02191981 |
- Install panel (10) .
Show/hide table
 | |
| Illustration 2 | g02191614 |
- Connect fitting (9). Connect hose assemblies (8) .
Show/hide table
 | |
| Illustration 3 | g02191608 |
- Install pressure sensor (7). Install bolt (6) .
Show/hide table
 | |
| Illustration 4 | g02191604 |
- Connect harness assembly (5).
Show/hide table
 | |
| Illustration 5 | g02191597 |
- Connect hose assemblies (4). Connect harness assembly (3) and harness assemblies (2). Connect hose assembly (1) .
Show/hide table
 | |
| Illustration 6 | g02191574 |
Caterpillar Information System:
994H Wheel Loader Engine Supplement Air Tank - Remove
966K Wheel Loader and 972K Wheel Loader Power Train Speed Sensor (Transmission Output)
2010/09/13 Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
Procedure for Replacement of the Transmission Shift Lever or Hoist Lever Sensor on Certain Off-Highway Trucks and Articulated Trucks{3065, 5063, 5737} Procedure for Replacement of the Transmission Shift Lever or Hoist Lever Sensor on Certain Off-Highway Trucks and Articulated Trucks{3065, 5063, 5737}
966K Wheel Loader and 972K Wheel Loader Power Train Speed Sensor (Torque Converter Output)
966K Wheel Loader and 972K Wheel Loader Power Train Torque Converter and Pump Drive Housing
C27 and C32 Engines for Caterpillar Built Machines Event Codes
C27 and C32 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
D8T Track-Type Tractor Engine Supplement Electronic Control Module (ECM) - Remove and Install
D6T Track-Type Tractor Power Train Location of Electrical Components
C4.4 Industrial Engine Mounting and Dismounting
2010/07/28 Correction to Systems Operation Testing and Adjusting , "Suspension System (Front) - Purge and Charge" {7201, 7201, 7218}
320E and 323E Excavators Hydraulic System Relief Valve (Line)
966K Wheel Loader and 972K Wheel Loader Power Train Transmission Oil Pump
320E and 323E Excavators Hydraulic System Check Valve (Load)
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System General Information (Brake, Hydraulic Fan System)
D11T Track-Type Tractor MID 082 - CID 0590 - FMI 09
D8T and D9T Track-Type Tractors MID 082 - CID 0600 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Engine Shutdown While Idling
G3304B and G3306B Engines Catalytic Converter Has High Outlet Temperature
D8T and D9T Track-Type Tractors MID 082 - CID 0600 - FMI 04
D11T Track-Type Tractor MID 082 - CID 0869 - FMI 03
D11R Track-Type Tractor Starting with Auxiliary Start Receptacle
D11T Track-Type Tractor MID 082 - CID 0869 - FMI 04