D7E Track-Type Tractor Engine Supplement Caterpillar

Removal Procedure

1. Open both the right side and left side engine doors.

Show/hide table



Illustration 1	g02174857

2. Cut cable strap (2) and disconnect harness assembly (1) .

Show/hide table



Illustration 2	g02174859
Right Side of the Machine

Show/hide table



Illustration 3	g02174860
Left Side of the Machine.

3. Cut clips (4) and remove flame detection temperature sensor (3) .

4. Cut clips (4) and remove inlet temperature sensor (5) .

Installation Procedure

1. Install flame detection temperature sensor (3) and inlet temperature sensor (5) in the reverse order of removal.

   1. Apply Tooling (A) to the threads on flame detection temperature sensor (3). Tighten the flame detection temperature sensors (3) to a torque of 45 ± 5 N·m (33 ± 4 lb ft).

   2. Apply Tooling (A) to the threads on inlet temperature sensor (5). Tighten the inlet temperature sensor (5) to a torque of 45 ± 5 N·m (33 ± 4 lb ft).