Brake Cooling Oil Level - Check
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
Tractor
Show/hide table
Illustration 1 | g02158622 |
Clean the area around the oil level gauge and the oil filler cap before you remove the oil level gauge and the oil filler cap.
- Before starting the engine, check the oil level gauge (2) . Maintain the oil level between the marks on the oil level gauge.
- If necessary, remove oil filler cap (1) in order to add oil.
- Clean the oil filler cap and install the oil filler cap.
Scraper
Show/hide table
Illustration 2 | g02830156 |
The hydraulic tank sight gauge is positioned on the rear of the machine.
- Operate the machine until the oil is warm.
- Park the machine on a level surface with the front wheels straight ahead.
- Lower all attachments to the ground.
- Engage the parking brake. Stop the engine.
- Maintain the oil level above the "MIN" mark on sight gauge (2) .
- If necessary, add oil. Clean the area around hydraulic oil filler cap (1) of any dirt or debris. This must be done before the hydraulic oil filler cap can be removed.
- Slowly remove the hydraulic oil filler cap in order to relieve the tank pressure.
- Add oil through the filler tube.
- Clean the hydraulic oil filler cap and install the hydraulic oil filler cap.
Caterpillar Information System:
623H Wheel Tractor-Scraper Brake Cooling Oil - Change
623H Wheel Tractor-Scraper Belts - Inspect/Replace
2011/06/29 A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
623H Wheel Tractor-Scraper ARD Spark Plug - Replace
2010/06/23 A New Gasket Is Now Used In the Air Conditioner Group on Certain Wheel Tractor-Scraper Machines {7320}
D6T Track-Type Tractor Diesel Particulate Filter Regeneration
D8T Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D11T Track-Type Tractor Power Train Oil - Change
D11T Track-Type Tractor Power Train Breather - Clean
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Aftercooler - Remove and Install - High Altitude Arrangement
C9.3 Engines for Caterpillar Built Machines Injector Solenoid - Test
D11T Track-Type Tractor Pivot Shaft Oil Level - Check
623H Wheel Tractor-Scraper Brake Cooling Oil Sample - Obtain
623H Wheel Tractor-Scraper Breather (Brake Cooling) - Replace
C9.3 Engines for Caterpillar Built Machines Configuration Parameters
C9.3 Tier 4 Interim Engines Cooling Fan Reversing - Test
2010/08/20 Improved Tilt Sensor Bracket and Cover Are Now Used on Certain Wheel Loader Machines {5736, 6107}
623H Wheel Tractor-Scraper Breather (Fuel Tank) - Replace
623H Wheel Tractor-Scraper Circuit Breakers - Reset
621H Wheel Tractor-Scraper Cooling System Coolant (ELC) - Change
623H Wheel Tractor-Scraper Cooling System Coolant Level - Check
623H Wheel Tractor-Scraper Cooling System Coolant Sample (Level 1) - Obtain
623H Wheel Tractor-Scraper Cooling System Pressure Cap - Clean/Replace
623H Wheel Tractor-Scraper Differential and Final Drive Oil - Change