ARD Spark Plug - Replace
Show/hide table
| NOTICE |
|---|
|
If the engine is running or the key is in the ON position the ARD plug will continue to fire. Turn the key to the OFF position before servicing the ARD plug. |
Show/hide table
| |
| Illustration 1 | g02126874 |
|
Tractor (1) Wiring harness (2) Spark plug | |
- Remove wire harness (1) from spark plug (2).
- Use a deep well socket and a breaker bar to loosen the spark plug. If necessary, see your Caterpillar dealer for the part number of the socket. After the spark plug has been loosened, use the socket to remove the spark plug by hand in order to detect problems with the threads.
Show/hide table
NOTICE Do not overtighten the spark plug. The shell can be cracked and the gasket can be deformed. The metal can deform and the gasket can be damaged. The shell can be stretched. This will loosen the seal that is between the shell and the insulator, allowing combustion pressure to blow past the seal. Serious damage to the engine can occur.
Use the proper torque.
- Install the spark plug by hand until the spark plug contacts the ARD. Torque the spark plug to the proper specification. Refer to Specifications, "Spark Plug" for the proper torque specification.
- Connect the wiring harness.
Caterpillar Information System:
2010/06/23 A New Gasket Is Now Used In the Air Conditioner Group on Certain Wheel Tractor-Scraper Machines {7320}
D6T Track-Type Tractor Diesel Particulate Filter Regeneration
D8T Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D11T Track-Type Tractor Power Train Oil - Change
D11T Track-Type Tractor Power Train Breather - Clean
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Aftercooler - Remove and Install - High Altitude Arrangement
C9.3 Engines for Caterpillar Built Machines Injector Solenoid - Test
D11T Track-Type Tractor Pivot Shaft Oil Level - Check
D11T Track-Type Tractor Lift Cylinder Yoke Bearings - Lubricate
D11T Track-Type Tractor Indicators and Gauges - Test
623H Wheel Tractor-Scraper Engine Starting with Auxiliary Start Receptacle
623H Wheel Tractor-Scraper Stopping the Engine
2011/06/29 A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
623H Wheel Tractor-Scraper Belts - Inspect/Replace
623H Wheel Tractor-Scraper Brake Cooling Oil - Change
623H Wheel Tractor-Scraper Brake Cooling Oil Level - Check
623H Wheel Tractor-Scraper Brake Cooling Oil Sample - Obtain
623H Wheel Tractor-Scraper Breather (Brake Cooling) - Replace
C9.3 Engines for Caterpillar Built Machines Configuration Parameters
C9.3 Tier 4 Interim Engines Cooling Fan Reversing - Test
2010/08/20 Improved Tilt Sensor Bracket and Cover Are Now Used on Certain Wheel Loader Machines {5736, 6107}
623H Wheel Tractor-Scraper Breather (Fuel Tank) - Replace
623H Wheel Tractor-Scraper Circuit Breakers - Reset
621H Wheel Tractor-Scraper Cooling System Coolant (ELC) - Change