Rollover Protective Structure (ROPS) - Remove and Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | QTY |
| A | 138-7575 | Link Brackets | 2 |
- Remove hand rail (1) .
Show/hide table
 | |
| Illustration 1 | g02164538 |
- Disconnect harness assembles (2). Repostion harness assembly (3) .
Show/hide table
 | |
| Illustration 2 | g02164537 |
- Repeat Step 2 for the other side.
- Disconnect hose assemblies (4) .
Show/hide table
 | |
| Illustration 3 | g02164542 |
- Attach a suitable lifting device to the ROPS (5). weighs of the ROPS (5) is approximately 430 kg (950 lb).
- Remove bolts (6) and (7) .
Show/hide table
 | |
| Illustration 4 | g02164539 |
- Repeat Step 6 for the other side.
- Remove ROPS (5) .
Show/hide table
 | |
| Illustration 5 | g02177252 |
Installation Procedure
- Install ROPS (5) in the reverse order of the removal procedure.
- Tighten bolts (7) to a torque of 1600 ± 200 N·m (1180 ± 148 lb ft).
Caterpillar Information System:
D11T Track-Type Tractor Power Train Oil - Change
D11T Track-Type Tractor Power Train Breather - Clean
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Aftercooler - Remove and Install - High Altitude Arrangement
C9.3 Engines for Caterpillar Built Machines Injector Solenoid - Test
D11T Track-Type Tractor Pivot Shaft Oil Level - Check
D11T Track-Type Tractor Lift Cylinder Yoke Bearings - Lubricate
D11T Track-Type Tractor Indicators and Gauges - Test
623H Wheel Tractor-Scraper Engine Starting with Auxiliary Start Receptacle
623H Wheel Tractor-Scraper Stopping the Engine
D11T Track-Type Tractor Hydraulic System Oil Sample - Obtain
D11T Track-Type Tractor Hydraulic System Oil Level - Check
623H Wheel Tractor-Scraper Declaration of Conformity
D6T Track-Type Tractor Diesel Particulate Filter Regeneration
2010/06/23 A New Gasket Is Now Used In the Air Conditioner Group on Certain Wheel Tractor-Scraper Machines {7320}
623H Wheel Tractor-Scraper ARD Spark Plug - Replace
2011/06/29 A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
623H Wheel Tractor-Scraper Belts - Inspect/Replace
623H Wheel Tractor-Scraper Brake Cooling Oil - Change
623H Wheel Tractor-Scraper Brake Cooling Oil Level - Check
623H Wheel Tractor-Scraper Brake Cooling Oil Sample - Obtain
623H Wheel Tractor-Scraper Breather (Brake Cooling) - Replace
C9.3 Engines for Caterpillar Built Machines Configuration Parameters
C9.3 Tier 4 Interim Engines Cooling Fan Reversing - Test
2010/08/20 Improved Tilt Sensor Bracket and Cover Are Now Used on Certain Wheel Loader Machines {5736, 6107}