New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
- Caterpillar Products: Machine Engines
- All 3500 Series
Description of Change: The new O-Ring has an increased sealing capability. This change increases the service life of the seal.
Adaptable To: The new 259-4598 O-Ring Seal is a direct replacement for the 235-3548 O-Ring Seal. The new O-Ring is adaptable back to first production on all 3500 Engines.
Show/hide table
Illustration 1 | g01953423 |
Front housing (1) 259-4598 O-Ring Seal bores |
Note: The bores for the new 259-4598 O-Ring Seal must be lubricated with 207-1601 Rubber Lubricant. Refer to Illustration 1 for the locations of the bores that must be lubricated.
Note: The seals for the idler shaft have not changed.This change is effective for engines with serial numbers that were built after 6January 2010.
Caterpillar Information System:
Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620} Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620}
2010/02/03 A New "B" Pin Bearing Has Been Designed for the Bucket of Medium Wheel Loaders that Are Used As Steel Mill Machines Working in Severe Applications {6107, 7000}
2009/07/27 A New Procedure Is Used for Improving the Starting Capability on 627G and 637G Wheel Tractor-Scrapers {0645, 1456, 1920, 7620}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Movement Without Request
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
2009/10/05 New Exhaust Manifold for Certain C6.6 Engines {1052, 1053, 1059}
AD30 Underground Articulated Truck Safety Messages
Installation of the CAES ARO Groups{7604} Installation of the CAES ARO Groups{7604}
D6T Track-Type Tractor Camera - Clean/Adjust
14L Motor Grader Water Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
2009/07/27 New Software Released in order to Reduce Harsh Transmission Shifting {7620}
C13, C15, and C18 Tier 4 Interim Engines ARD Temperature Is Low
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Check Valve (Brake Accumulator)
953D, 963D and 973D Track-Type Loaders Hydraulic System Pressure Is Low
966H and 972H Wheel Loaders Declaration of Conformity
IT38H Integrated Toolcarrier and 938H Wheel Loader Declaration of Conformity
C9.3 Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
C9.3 Tier 4 Final Engines Diesel Particulate Filter Has High Ash Load
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Droops Before Raising
2009/09/28 A New Slip Joint Group Improves Service Life of the Drive Shaft {3251}
953D, 963D and 973D Track-Type Loaders Hydraulic System Hesitates
966H Wheel Loader and 972H Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)