C9.3 Engines for Caterpillar Built Machines Caterpillar


Soot Antenna - Remove and Install

Usage:

336E L BMH

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A.     −     Loctite 771     −    



    图 1g02176947

    显示烟尘天线位置的典型示例




    图 2g02176944

    典型示例

    注: 确保烟尘天线和线束组件连接清洁无污染物。 为了防止污染物进入接头,断开时,务必利用塞子或保护盖封堵接头。

  1. 将线束组件 (3) 从烟尘天线 (2) 上断开。

  1. 从柴油微粒滤清器组件 (1) 上拆下烟尘天线 (2) 。

安装步骤

  1. 按照相反顺序安装烟尘天线 (1) 。

    1. 将工具 (A) 涂抹到烟尘天线 (2) 的螺纹上。 将烟尘天线 (2) 拧紧至扭矩为 45 ± 5 N·m (33 ± 4 lb ft)。

      注: 确保烟尘天线和线束组件连接清洁无污染物。

    1. 连接到烟尘天线 (2) 上时,手动拧紧线束组件 (3) 。

Caterpillar Information System:

2009/10/05 New Exhaust Manifold for Certain C6.6 Engines {1052, 1053, 1059}
AD30 Underground Articulated Truck Safety Messages
Installation of the CAES ARO Groups{7604} Installation of the CAES ARO Groups{7604}
D6T Track-Type Tractor Camera - Clean/Adjust
14L Motor Grader Water Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
2009/08/31 A New Alternator Is Available for the Tier III 657G Wheel Tractor-Scraper Tractor Engines {1405}
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
D6T Track-Type Tractor Camera
2009/08/31 A New Alternator Is Available for the Tier III 631G and the Tier III 637GWheel Tractor-Scraper Tractor Engines {1405}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Ride Control Valve
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove and Install
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Movement Without Request
2009/07/27 A New Procedure Is Used for Improving the Starting Capability on 627G and 637G Wheel Tractor-Scrapers {0645, 1456, 1920, 7620}
2010/02/03 A New "B" Pin Bearing Has Been Designed for the Bucket of Medium Wheel Loaders that Are Used As Steel Mill Machines Working in Severe Applications {6107, 7000}
Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620} Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620}
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2009/07/27 New Software Released in order to Reduce Harsh Transmission Shifting {7620}
C13, C15, and C18 Tier 4 Interim Engines ARD Temperature Is Low
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Check Valve (Brake Accumulator)
953D, 963D and 973D Track-Type Loaders Hydraulic System Pressure Is Low
966H and 972H Wheel Loaders Declaration of Conformity
IT38H Integrated Toolcarrier and 938H Wheel Loader Declaration of Conformity
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.