Engine Oil Cooler - Remove and Install
拆卸步骤
开始:
- 拆下发动机机油滤清器底座。 请参阅拆解和组装, "发动机机油滤清器底座 - 拆卸"。
Show/hide table
 |
热的冷却液、蒸汽和碱会造成人身伤害。 在工作温度下，发动机冷却液是热的而且处在压力下。 散热器和所有到加热器的管路或发动机中都有热的冷却液或蒸汽。 与它们的任何接触都会造成严重烫伤。 只有当发动机停机且冷却系统压力盖已经冷却到可以徒手触摸时，再慢慢拆下冷却系统压力盖以释放压力。 不要试图在冷却液还热的时候去拧紧软管接头，软管会脱落而造成灼伤。 警告：冷却系统的冷却液添加剂含碱。 应避免它与皮肤和眼睛接触。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 拆下发动机机油冷却器 (1) 和密封垫。
Show/hide table
 | |
| 图 1 | g00952338 |
安装步骤
- 按照相反顺序安装发动机机油冷却器。
Caterpillar Information System:
2009/08/31 A New Alternator Is Available for the Tier III 657G Wheel Tractor-Scraper Tractor Engines {1405}
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
D6T Track-Type Tractor Camera
2009/08/31 A New Alternator Is Available for the Tier III 631G and the Tier III 637GWheel Tractor-Scraper Tractor Engines {1405}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Ride Control Valve
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
D11T Track-Type Tractor Machine Systems Ladder - Install
D11T Track-Type Tractor Machine Systems Ladder - Remove
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
Work Tool (Custom) 348-4916 Lumber Fork Reference Material
Work Tool (Custom) 348-4916 Lumber Fork Log and Lumber Fork - Lubricate
Work Tool (Custom) 348-4916 Lumber Fork Maintenance Interval Schedule
14L Motor Grader Water Pump - Remove and Install
D6T Track-Type Tractor Camera - Clean/Adjust
Installation of the CAES ARO Groups{7604} Installation of the CAES ARO Groups{7604}
AD30 Underground Articulated Truck Safety Messages
2009/10/05 New Exhaust Manifold for Certain C6.6 Engines {1052, 1053, 1059}
C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove and Install
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Movement Without Request
2009/07/27 A New Procedure Is Used for Improving the Starting Capability on 627G and 637G Wheel Tractor-Scrapers {0645, 1456, 1920, 7620}
2010/02/03 A New "B" Pin Bearing Has Been Designed for the Bucket of Medium Wheel Loaders that Are Used As Steel Mill Machines Working in Severe Applications {6107, 7000}
Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620} Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620}
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}