C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Flywheel - Remove and Install

Usage:

826K 232

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
138-7573  提升支架 
FT2712  导向双头螺栓 


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g01953202

  1. 将工具 (A) 安装到飞轮上。 使用适当的提升装置。 飞轮的重量约为 40 kg (88 lb)

  2. 拆下两个螺栓 (1)。 安装工具 (B)。

  3. 卸下将飞轮固定在曲轴上的其余螺栓 (1)。 拆下飞轮 (2)。


    图 2g01953204

  4. 必要时,利用手锤和冲头将齿圈 (3) 从飞轮上拆下。

安装步骤

  1. 按与拆卸相反的顺序安装飞轮 (2)。

  2. 拧紧螺栓 (1) 至扭矩为 270 ± 40 N·m (200 ± 30 lb ft)

Caterpillar Information System:

C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
2009/10/05 New Exhaust Manifold for Certain C6.6 Engines {1052, 1053, 1059}
AD30 Underground Articulated Truck Safety Messages
Installation of the CAES ARO Groups{7604} Installation of the CAES ARO Groups{7604}
D6T Track-Type Tractor Camera - Clean/Adjust
14L Motor Grader Water Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
2009/08/31 A New Alternator Is Available for the Tier III 657G Wheel Tractor-Scraper Tractor Engines {1405}
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
D6T Track-Type Tractor Camera
2009/08/31 A New Alternator Is Available for the Tier III 631G and the Tier III 637GWheel Tractor-Scraper Tractor Engines {1405}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Ride Control Valve
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Movement Without Request
2009/07/27 A New Procedure Is Used for Improving the Starting Capability on 627G and 637G Wheel Tractor-Scrapers {0645, 1456, 1920, 7620}
2010/02/03 A New "B" Pin Bearing Has Been Designed for the Bucket of Medium Wheel Loaders that Are Used As Steel Mill Machines Working in Severe Applications {6107, 7000}
Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620} Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620}
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2009/07/27 New Software Released in order to Reduce Harsh Transmission Shifting {7620}
C13, C15, and C18 Tier 4 Interim Engines ARD Temperature Is Low
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Check Valve (Brake Accumulator)
953D, 963D and 973D Track-Type Loaders Hydraulic System Pressure Is Low
966H and 972H Wheel Loaders Declaration of Conformity
IT38H Integrated Toolcarrier and 938H Wheel Loader Declaration of Conformity
C9.3 Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.