Fuel Manifold (ARD) - Install
Installation Procedure
- Install fuel manifold (14). Install nut (15). Install bolts (12) and (13) .
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 1 | g01261494 |
Show/hide table
Illustration 2 | g01261496 |
- Connect harness assemblies (16) and (17) .
- Connect tube assemblies (9) and (10). Install tube assembly (8). Connect tube assembly (8). Install bolt (11). Connect tube assembly (6). Install tube assembly (7) .
Show/hide table
Illustration 3 | g01261491 |
Show/hide table
Illustration 4 | g01261490 |
- Position tube assembly (2). Install bolt (4) and bolt (5) .
Show/hide table
Illustration 5 | g01261488 |
- Connect tube assembly (2). Connect harness assembly (3). Install new cable straps (1) .
Show/hide table
Illustration 6 | g01261486 |
End By:
- Install the oil manifold. Refer to Disassembly and Assembly, "Oil Manifold - Remove and Install".
- Install the air compressor. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Caterpillar Information System:
CX31 On-Highway Transmission Gear Pump (Transmission)
C13 Engine Electronic Unit Injector Sleeve - Remove
C13 and C15 On-highway Engines Engine/Gear Parameters
C13 Engine Electronic Unit Injector - Remove and Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 735 - FMI 3
C7 PETROLEUM Petroleum Engine Air Compressor - Remove and Install
C7 On-Highway Engine Fuel Manifold (ARD) - Remove
793F and 793F CMD Off-Highway Truck Automatic Lubrication System Automatic Lubrication System - Test
C7 PETROLEUM Petroleum Engine Electric Starting Motor - Remove and Install
C13 Engine Fuel Transfer Pump - Remove and Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 734 - FMI 3
C7 On-highway Engine Fuel Control Manifold - Aftertreatment Regeneration Device
C13 Engine Electronic Unit Injector Sleeve - Install
2006/04/17 New Speed Timing Sensor Available {1912}
2006/06/01 An Improved Speed-Timing Sensor is Now Available {1912}
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 736 - FMI 3
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 737 - FMI 3
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 738 - FMI 3
C7 and C9 On-Highway Engines Timer Parameters
G3406 Engine Engine Auxiliary Sump Oil - Change
C11 and C13 Petroleum Engines Rocker Arm and Shaft - Remove
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 740 - FMI 3
C11 and C13 Petroleum Engines Rocker Arm and Shaft - Install
CX28 On-Highway Transmission Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust