D6N Track-Type Tractor Machine Systems Caterpillar

Cab - Install

Usage:

D6N GHS

Installation Procedure

Show/hide table

Table 1
Required Tools
Tool	Part Number	Part Description	Qty
A	138-7575	Link Bracket	3

Show/hide table

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates.

Show/hide table




Illustration 1	g01779813

Show/hide table




Illustration 2	g01779814

Attach a suitable lifting device and Tooling (A) to cab (46) .

Position cab (46). The weight of cab (46) is approximately 771 kg (1700 lb).

Show/hide table




Illustration 3	g01779818

Install bolts (47) .

Show/hide table




Illustration 4	g01779794

Install floorplate (45) .

Show/hide table




Illustration 5	g01779779

Install floor mat (44) and footrest (43) .

Show/hide table




Illustration 6	g01779743

Connect harness assemblies (42) .

Show/hide table




Illustration 7	g01779740

Connect cable assembly (41). Connect clamp (40). Tighten the bolts to a torque of 7.2 ± 1.6 N·m (64 ± 14 lb in).

Show/hide table




Illustration 8	g01779729

Install panel (39). Repeat for the other side.

Show/hide table




Illustration 9	g01797795

Connect harness assemblies (37) and (38) .

Show/hide table




Illustration 10	g01779720

Connect harness assembly (36). Install cable straps (35) .
Note: There are multiple cable straps (35) .

Show/hide table




Illustration 11	g01779719

Connect harness assemblies (32) and (34). Connect clamp (33) .

Show/hide table




Illustration 12	g01779674

Connect cable assembly (29) and ground strap (30). Connect clamp (31) .

Show/hide table




Illustration 13	g01779695

Install covers (27) and (28) .

Show/hide table




Illustration 14	g01779673

Connect harness assemblies (25) and clip (26) .

Show/hide table




Illustration 15	g01779641

Install cover (24) .

Show/hide table




Illustration 16	g01779633

Install consoles (23) and bolts (22) .

Show/hide table




Illustration 17	g01778618

Position console (19) and connect harness assemblies (21) .

Show/hide table




Illustration 18	g01778617

Reposition console (19) and install bolts (20).

Show/hide table




Illustration 19	g01778616

Position panel (18) and install bolts (17) .

Show/hide table




Illustration 20	g01778615

Install armrest (14) and plate (16). Install bolts (15). Repeat for the other side.

Show/hide table




Illustration 21	g01754093

Position connector assembly (13). Install nut (12) .

Show/hide table




Illustration 22	g01754038

Install insulation (11) .

Show/hide table




Illustration 23	g01753973

Connect hose assembly (8). Connect clamps (9) and (10). Install bolts (7).

Show/hide table




Illustration 24	g01753953

Connect hose assembly (6A) and harness assembly (6) .

Show/hide table




Illustration 25	g01753754

Connect the hoses and install clamps (5). Torque for the clamps is 8 ± 3 N·m (72 ± 27 lb in).

Show/hide table




Illustration 26	g01753736

Position plates (4) and install bolts (3) .

Show/hide table




Illustration 27	g01753715

Position cover (2). Install bolts (1). Repeat for the other side.

Install the cab filters. Refer to Operation and Maintenance Manual, "Cab Filter (Fresh Air) - Clean/Inspect/Replace".

Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change".

Charge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.

End By:

Install the rollover protective structure. Refer to Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install".
Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Install the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".