Fan Drive Mounting Group
Show/hide table
Illustration 1 | g01255740 |
Typical example |
Use the following procedure in order to tighten the bolts for the support assemblies:
- Install four bolts (3) loosely through the support assembly (1) onto the front of the engine.
- Install bolts (4) and bolts (5) loosely in order to assemble the support assembly (2) onto the support assembly (1) .
- Assemble the support assembly (2) onto the housing for the water pump and the regulator housing with bolts (6) and screw (8) .
Show/hide table
Illustration 2 | g01255741 |
Typical example |
- Tighten the front four primary mounting bolts (3) to standard torque.
- Tighten bolts (4) and bolts (5) to standard torque.
- Tighten bolts (6) to the water pump housing to standard torque.
- Tighten the screw (8) to 15 ± 3 N·m (11 ± 2 lb ft).
Note: All of the bushings (7) must seat firmly on the housings.
Caterpillar Information System:
G3500 Engines Before Starting Engine
G3500 A3 Engines Cover Group (Front Housing)
C15 On-Highway Engine Crankshaft Front Seal - Install
C15 On-Highway Engine Crankshaft Front Seal - Remove
C15 On-Highway Engine Vibration Damper and Pulley - Remove and Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0702 - FMI 02
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0668 - FMI 09
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0177 - FMI 01
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0177 - FMI 00
Turbocharger Surge on G3500 Generator Sets and G3500 Generator Set Engines that are Equipped with Dual Turbochargers{1052, 1057, 1071} Turbocharger Surge on G3500 Generator Sets and G3500 Generator Set Engines that are Equipped with Dual Turbochargers{1052, 1057, 1071}
2006/04/03 A New Grease is Used {0645}
C15 On-Highway Engine Belt Tensioner - Remove and Install
G3508, G3512 and G3516 Engines Vibration Damper - Remove and Install
C15 On-Highway Engine Engine Oil Filter Base - Disassemble
C7 PETROLEUM Petroleum Engine Fuel Transfer Pump - Remove
C15 On-Highway Engine Engine Oil Filter Base - Assemble
G3516B and G3520B Generator Set Engines Flywheel - Remove and Install
C7 On-highway Engine Jacket Water Heater
G3500 Engines Cold Weather Starting
G3500 Engines Starting the Engine
C15 Industrial Engine Cooling Fan Circuit and A/C High Pressure Switch Circuit - Test
C13, C15, and C18 Tier 4 Final Engines Flywheel
C3.3 and C4.4 Generator Sets Flywheel Housing - Remove and Install
3500B and 3500C Locomotive Engines Electrical Connectors and Functions