Speed Override and Brake Control - Remove and Install
Start By:
- Remove the floorplate. Refer to Disassembly and Assembly, "Floor Plates - Remove and Install".
- Remove cover (1).
Show/hide table
Illustration 2 g01470394 - Disconnect harness assembly (2). Remove bolts (4) and plate assembly (3).
Show/hide table
Illustration 3 g01470452 - Remove control unit (5).
Show/hide table
Illustration 4 g01470455 - Hold down brake pedal (6) and remove retaining pin (7).
Show/hide table
Illustration 5 g01470456 - Remove pin (9) and center shaft (8). Remove brake pedal (6).
Show/hide table
Illustration 6 g01470457 - Remove bearings (10).
Show/hide table
Illustration 7 g01470460 Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove nut (12) and the bolt. Remove springs (11).
Show/hide table
| |
| Illustration 1 | g01470390 |
- Install springs (11). Install the bolt and nut (12).
Show/hide table
Illustration 9 g01470457 - Install bearings (10).
Show/hide table
Illustration 10 g01470456 - Position brake pedal (6). Install center shaft (8) and pin (9).
Show/hide table
Illustration 11 g01470455 - Position brake pedal (6) and install retaining pin (7).
Show/hide table
Illustration 12 g01470452 - Install control unit (5).
Show/hide table
Illustration 13 g01470394 - Position plate assembly (3) and install bolts (4). Connect harness assembly (2).
Show/hide table
Illustration 14 g01470390 - Install cover (1).
Show/hide table
| |
| Illustration 8 | g01470460 |
Show/hide table
|
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
End By:
- Install the floorplate. Refer to Disassembly and Assembly, "Floor Plates - Remove and Install".
Caterpillar Information System:
2008/03/10 The Sealing for the Hydraulic Screen Group is Improved {5068}
994F Wheel Loader Prelubrication Oil Pump - Remove and Install
973D Track-Type Loader Machine Systems Ripper Control - Remove and Install
973D Track-Type Loader Machine Systems Joystick Control - Remove and Install - Direction and Speed Control
2008/04/14 A New Margin Relief Valve Is Now Used {5264}
854K Wheel Dozer Machine Systems Main Control Valve - Remove
973D Track-Type Loader Machine Systems Window Wiper and Motor (Front) - Remove and Install
2008/03/10 The Process for Installing Bonded Glass on Medium Wheel Loaders has been Updated {7310}
973K Track-Type Loader Machine Systems Floor Plates - Remove and Install
Payload Control System Printer {7494, 749P} Payload Control System Printer {7494, 749P}
D6N Track-Type Tractor Sound Information and Vibration Information
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Level Sender (Automatic Lubrication Tank)
992K Wheel Loader Electrohydraulic System Pump Performance (Implement) (Lift Time) - Test
973D Track-Type Loader Machine Systems Joystick Control - Remove and Install - Loader
854K Wheel Dozer Machine Systems Main Control Valve - Install
2008/04/28 New Software For the Machine ECM Is Now Available {1408, 3030, 5700, 7610, 7620}
D6N Track-Type Tractor Operator Controls
906, 907 and 908 Compact Wheel Loaders Power Train Wheel and Brake Group (Front) (High Speed Axle) - Install
906, 907 and 908 Compact Wheel Loaders Power Train Wheel and Brake Group (Front) (High Speed Axle) - Disassemble
906, 907 and 908 Compact Wheel Loaders Power Train Wheel and Brake Group (Front) (High Speed Axle) - Assemble
906, 907 and 908 Compact Wheel Loaders Power Train Transfer Drive Group (Hydrostatic) (Standard Speed) - Disassemble
906, 907 and 908 Compact Wheel Loaders Power Train Transfer Drive Group (Hydrostatic) (Standard Speed) - Assemble
906, 907 and 908 Compact Wheel Loaders Power Train Rear Axle and Transfer Drive Group - Remove
906, 907 and 908 Compact Wheel Loaders Power Train Rear Axle and Transfer Drive Group - Install