Load Feedback - Calibrate
系统运作描述:
负载反馈信号是一个 4 到 20 mA 的信号。 根据用于监测信号的设备负载，该信号的完整范围可能不可用。 用户可以在 Caterpillar 电子技师（ET）上标定负载反馈信号，以便获得电流输出的完整范围。
测试步骤 1. 标定"发动机负载反馈"
- 从 Cat ET 的"维修"菜单中选择"标定"。 从"标定"菜单中选择"发动机负载反馈"。
- 按照 Cat ET 标定屏幕上的说明操作。
预期结果:
"发动机负载反馈"标定步骤成功。
结果:
- 正常 - "完成发动机负载反馈"标定步骤成功。停止
Caterpillar Information System:
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0002 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0004 FMI 05
C280 Marine Propulsion Engines Sensor Supply
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0003 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0002 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0001 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0001 FMI 05
Caterpillar On-Highway Diesel Engine Fluids Recommendations Extended Life Coolant
C280 Marine Propulsion Engines Injector Solenoids
G3500 A3 Engines Electronic Control System Parameters
C9 Industrial Engines Model View Illustrations
C18 Marine and Marine Generator Set Engines Flywheel
AccuGrade® GPS (CD700) Angle Sensor - Calibrate - AS300 System
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0003 FMI 06
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0004 FMI 06
C280 Marine Propulsion Engines Throttle Position Sensor - Calibrate
AccuGrade® GPS (CD700) Wiring Harness (Open Circuit) - Test
AccuGrade® GPS (CD700) Wiring Harness (Short Circuit) - Test
C280 Marine Propulsion Engines Panel Relay
Caterpillar On-Highway Diesel Engine Fluids Recommendations Extended Life Coolant Cooling System Maintenance
3406C Engines for Caterpillar Built Machines Engine Oil Pan
G3406 Engine Engine Air Precleaner - Check/Clean
C4.4 Industrial Engine Safety Messages
G3508, G3512 and G3516 Engines Fuel Control Actuator - Remove and Install