Improved Quality Of Center Crossmember {6107}
- Track-Type Loader:
- 963C (S/N: BBD1-UP; 2DS1-UP)
- 963D (S/N: LCS1-UP)
Description of Change: The manufacturing process of the 192-4077 Crossmember in the lift arms has been improved. The improvement in the manufacturing of the 192-4077 Crossmember has improved the quality of the ears on the 192-4077 Crossmember .
Adaptable To: The 192-4077 Crossmember is included in the following serviceable assemblies:
216-1018 Lift Arm and Bearing As is used for 963C (S/N: BBD1-UP; 2DS1-UP). 285-3818 Lift Arm and Bearing As is used for 963D (S/N: LCS1-UP).The improved crossmember is adaptable to the 963C (S/N: BBD1-2845; 2DS1-UP). The improved crossmember is effective with the following machines:
- 963C (S/N: BBD2846-UP)
- 963D (S/N: LCS1-UP)
Caterpillar Information System:
Parts and Installation of the 284-3875 Drive Shaft Kit {3253} Parts and Installation of the 284-3875 Drive Shaft Kit {3253}
2008/04/07 An Improved Motor For The Air Conditioning Condenser Is Now Available {1805, 1815, 5927, 7320}
2007/11/05 Replacement of the Priming Pump {1258, 1263}
3176C and 3196 Engines for Caterpillar Built Machines Fuel Lines
994F Wheel Loader Radiator Core - Clean
994F Wheel Loader Machine Systems Oil Filter (Implement Pilot) (Front Pump Drive) - Remove and Install
994F Wheel Loader Fuel Tank Water and Sediment - Drain
994F Wheel Loader Frame - Inspect
3176C and 3196 Engines for Caterpillar Built Machines Fuel Lines
994F Wheel Loader VIMS Payload Control System
3176C and 3196 Engines for Caterpillar Built Machines Turbocharger
854K Wheel Dozer and 992K Wheel Loader Fuel Cooler - Remove and Install
2007/10/15 A New Spring Pin Is Used on the Bracket for the Warning Beacon {1431}
2007/10/15 Improved Mounting For Air Conditioning Compressor {1802, 7320}
319D Excavator Hydraulic System Relief Valve (Pilot)
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Hydraulic Fan Speed - Test and Adjust
Procedure to Improve Alignment of the Left Door on Medium Wheel Loaders{7308} Procedure to Improve Alignment of the Left Door on Medium Wheel Loaders{7308}
2009/07/27 Improvements Have Been Made to the Automatic Lubrication System (Hydraulic Actuated Systems) {7540}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
2007/10/15 Washers are Now Used with the Bolts for the Engine Oil Pan {1302}
834H Wheel Dozer and 836H Landfill Compactor Seat
D11T Track-Type Tractor Engine Starting with Jump Start Cables
2007/10/29 The Mounting for the Accumulator Has Been Improved on Certain Wheel Tractor-Scrapers {4331, 5077, 5081, 7107}
C4.4 and C6.6 Engines for Caterpillar Built Machines Injector Data Incorrect - Test