- Wheel Loader:
- 902 (S/N: 7ES1-UP)
- 906 (S/N: MER1-1663; 6ZS1-UP)
- 908 (S/N: TAR1-929; 8BS1-UP)
- 906 (S/N: MER1-1663; 6ZS1-UP)
Introduction
This Special Instruction explains the selection and the installation procedure for repair. Do not begin the procedure until you have read the information that is contained in this instruction.
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly.
Refer to the appropriate Parts Manual, Operation and Maintenance Manual, Disassembly and Assembly Manual, and Service Manual.
Safety precautions and warnings are provided in the manuals and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Refer to the Operation and Maintenance Manual for your machine.
- Park the machine on a smooth, level surface. Move away from other operating machines and away from personnel. Lower the bucket to the ground.
- Permit only one operator on the machine. Keep other personnel away from the machine or in the operator's sight.
- Engage the parking brake. Place blocks in front of the wheels and behind the wheels.
Required Parts
| Required Parts | ||
| Part | Description | Qty |
| 284-3875 | Drive Shaft Kit | 1 |
| Parts of the 284-3875 Drive Shaft Kit | ||
| Part | Description | Qty |
| 211-0104 | Drive Shaft | 1 |
| 286-1687 | Pinion Drive Shaft | 1 |
| 314-4025 | Drive Shaft | 1 |
Selection of Parts
 | |
| Illustration 1 | g01423479 |
The parts that are supplied with the 284-3875 Drive Shaft Kit (A) 69 mm (2.7 inch) (B) 139 mm (5.5 inch) (1) 211-0104 Drive Shaft (ORIGINAL SHORT PINION) (2) 286-1687 Pinion Drive Shaft (DOG DRIVE) (3) 314-4025 Drive Shaft (NEW LONG PINION) | |
The 211-0104 Drive Shaft , the 286-1687 Pinion Drive Shaft , and the 314-4025 Drive Shaft are part of the 284-3875 Drive Shaft Kit . Select the part that is needed for the repair of the machine.
Reference for Installation
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Remove"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Disassemble"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Assemble"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Install"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Standard) - Remove"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Standard) - Disassemble"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Standard) - Assemble"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Standard) - Install"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Limited Slip) - Remove"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Limited Slip) - Disassemble"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Limited Slip) - Assemble"
ReferenceDisassembly and Assembly, SENR1283, "902 and 906 Wheel Loaders Power Train", "Differential (Limited Slip) - Install"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Remove"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Disassemble"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Assemble"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Transfer Drive and Trunnion (Hydrostatic) - Install"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Differential (Standard) - Remove"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Differential (Standard) - Disassemble"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Differential (Standard) - Assemble"
ReferenceDisassembly and Assembly, SENR2831, "908 Wheel Loaders Power Train", "Differential (Standard) - Install"
ReferenceDisassembly and Assembly, RENR2831, "908 Wheel Loader Power Train", "Differential (Limited Slip) - Remove"
ReferenceDisassembly and Assembly, RENR2831, "908 Wheel Loader Power Train", "Differential (Limited Slip) - Disassemble"
ReferenceDisassembly and Assembly, RENR2831, "908 Wheel Loader Power Train", "Differential (Limited Slip) - Assemble"
ReferenceDisassembly and Assembly, RENR2831, "908 Wheel Loader Power Train", "Differential (Limited Slip) - Install"