Removal Procedure
Show/hide table
Table 1
| Required Tools |
| Tool |
Part Number |
Part Description |
Qty |
| A |
138-7573 |
Link Bracket |
2 |
| B |
1U-9200 |
Lever Puller Hoist |
1 |
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Show/hide table
|
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
|
- Drain the fuel tank into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)".
Show/hide table
|
 |
|
| Illustration 1 | g01327281 |
- Loosen nuts (1) .
Show/hide table
|
 |
|
| Illustration 2 | g01328803 |
- Disconnect hose assembly (2) .
Show/hide table
|
 |
|
| Illustration 3 | g01328812 |
- Remove plugs (3). Remove baffle (4) .
Show/hide table
|
 |
|
| Illustration 4 | g01328850 |
- Loosen nuts (5) .
Show/hide table
|
 |
|
| Illustration 5 | g01328868 |
- Disconnect harness assembly (6). Remove bolt (7) .
Show/hide table
|
 |
|
| Illustration 6 | g01328869 |
- Remove bolts (8) .
Show/hide table
|
 |
|
| Illustration 7 | g01328872 |
- Remove bolts (9). Remove bolts (10) .
Show/hide table
|
 |
|
| Illustration 8 | g01328880 |
- Install Tooling (A), Tooling (B), and a suitable lifting device to fuel tank guard (11). The weight of fuel tank guard (11) is approximately 175 kg (385 lb). Remove fuel tank guard (11) .
Show/hide table
|
 |
|
| Illustration 9 | g01328892 |
- Disconnect harness assembly (12). Remove bolts (13). Remove bolts (14) .
Show/hide table
|
 |
|
| Illustration 10 | g01328898 |
- Disconnect hose assembly (16). Use two people to remove fuel tank (15). The weight of fuel tank (15) is approximately 35 kg (76 lb).
