Transfer Gears - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | - | 3/8 - 16 × 3 in 顶出螺栓 |
2 |
| B | 138-7575 | 连杆支架 | 1 |
开始:
- 卸下铰接缓冲装置泵。 请参阅拆解和组装, "铰接缓冲装置活塞泵 - 拆卸"。
- 从变速箱上卸下转速传感器总成。 请参阅拆解和组装, "变速箱转速传感器 - 拆卸"。
- 卸下传动系防护罩。 请参阅拆解和组装, "变速箱传动系防护罩 - 拆卸和安装"。
- 将变速箱油排入合适的容器以便保存或废弃这些变速箱油。 请参阅操作和保养手册, "变速箱油 - 更换"。
- 卸下夹子 (2) 。 断开软管组件 (1) 。
Show/hide table
 | |
| 图 1 | g01308828 |
- 断开线束组件 (3) 。 作为一个整体卸下支承组件 (4) 和泛光灯。
Show/hide table
 | |
| 图 2 | g01308852 |
- 拆下螺栓 (5) 。 使用工具 (A) ，卸下盖 (6) 和垫片 (7) （图上未显示）。
Show/hide table
 | |
| 图 3 | g01308854 |
- 卸下齿轮组件 (8) 。 需要两个人，卸下轴 (9) 。 轴 (9) 的重量约为 25 kg (55 lb)。
Show/hide table
 | |
| 图 4 | g01308855 |
- 将工具 (B) 和适当的起吊设备连接在分动器总成 (13) 上。 分动器总成 (13) 的重量约为 238 kg (525 lb)。
Show/hide table
 | |
| 图 5 | g01308857 |
Show/hide table
 | |
| 图 6 | g01308858 |
- 使用适当的设备支撑管组件 (14) 。 卸下螺栓 (15) 、螺栓 (10) 和螺栓 (11) 。 卸下分动器总成 (13) 。 卸下 O 形密封圈 (16) 和 (12) （图上未显示）。
- 卸下 O 形密封圈 (17) 。
Show/hide table
 | |
| 图 7 | g01308861 |
Caterpillar Information System:
3516B Generator Set Engines with Dynamic Gas Blending Electrical Connectors - Inspect
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Cooling System Package (Radiator, Aftercooler, Hydraulic Oil Cooler) - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Cooling System Package (Radiator, Aftercooler, Hydraulic Oil Cooler) - Remove
D6K Track-Type Tractor Hydraulic System Angle Cylinder (Bulldozer)
D6K Track-Type Tractor Hydraulic System Cylinder (Ripper)
D6K Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
2006/10/02 Mounting Brackets for the Refrigerant Compressor Have Been Improved {1802}
D6K Track-Type Tractor Hydraulic System Tilt Cylinder (Bulldozer)
The Implement Valve May Leak on Certain Wheel Loaders and Integrated Toolcarriers{5051} The Implement Valve May Leak on Certain Wheel Loaders and Integrated Toolcarriers{5051}
D6G Series II Track-Type Tractor Power Train Final Drive - Assemble
C175-16 Locomotive Engine Crankshaft Position for Valve Lash Setting
AD55B Underground Articulated Truck Power Train Transmission Planetary
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transfer Gears - Install
963D Track-Type Loader Machine Systems Hydraulic Tank - Remove
963D Track-Type Loader Machine Systems Hydraulic Tank - Install
C175-16 Locomotive Engine Cylinder Head
Bench Test Procedure for a D5 and D5B Track-Type Tractor Transmission {3030, 3073} Bench Test Procedure for a D5 and D5B Track-Type Tractor Transmission {3030, 3073}
D11R Track-Type Tractor Power Train Machine Preparation
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0190 - FMI 02
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission from Differential - Separate
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission to Differential - Connect
AD55B Underground Articulated Truck Power Train Relief Valve (Torque Converter Inlet)
D6G Series II Track-Type Tractor Power Train Sprocket Hub - Install
2006/09/25 A New Cartridge Pin Is Now Used {6107, 6117, 6118}