938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Caterpillar


Pressure Switch (Power Train Oil Filter Bypass)

Usage:

938H JKM


Illustration 1g00724572

(1) Torque for final installation of the switch ... 5.5 ± 1.5 N·m (50 ± 13 lb in)

Actuation pressure ... 276 ± 28 kPa (40 ± 4 psi)

Deactuation pressure (minimum) ... 179 kPa (26 psi)

The switch is normally closed below the deactuation pressure.

Caterpillar Information System:

525C, 535C and 545C Wheel Skidders Machine Systems Control Manifold (Pilot) (Differential Lock) - Assemble
525C, 535C and 545C Wheel Skidders Machine Systems Control Manifold (Pilot) (Differential Lock) - Disassemble
525C, 535C and 545C Wheel Skidders Machine Systems Control Manifold (Pilot) (Differential Lock) - Install
525C, 535C and 545C Wheel Skidders Machine Systems Control Manifold (Pilot) (Differential Lock) - Remove
Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056} Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
525C, 535C and 545C Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Oil Pump - Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Oil Pump - Remove
992G Wheel Loader and 854G Wheel Dozer Power Train Speed Sensor (Transmission Output)
Underground Articulated Trucks Truck Payload Measurement System System Components
Underground Articulated Trucks Truck Payload Measurement System Calibration
Underground Articulated Trucks Truck Payload Measurement System General Information
2006/05/08 Improved Design For Alternator Guard {7168}
525C, 535C and 545C Wheel Skidders Machine Systems Cab - Remove
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
525C, 535C and 545C Wheel Skidders Machine Systems Cab - Install
C9 On-highway Engine Electronic Unit Injector Wiring
Assembly Procedure for the 844H Wheel Dozer{7000, 7960} Assembly Procedure for the 844H Wheel Dozer{7000, 7960}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705} Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
854K Wheel Dozer Radiator Core - Clean
C4.4 Industrial Engine Electronic Control System
AccuGrade® GPS (CD700) Display Description
D3K, D4K and D5K Track-Type Tractors Track - Check/Adjust
631G and 637G Wheel Tractor-Scrapers Machine Systems Fuel Tank - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.