MID 074 - CID 0817 - FMI 08
产生此代码的情况:
Show/hide table
 | |
| 图 1 | g01008701 |
当有效载荷系统 ECM 确定 ECM 内部时钟功能异常时，记录该诊断代码。
测试步骤 1. 更换 ECM
- 将钥匙起动开关转到 OFF（关闭）位置。
- 更换 ECM。
参考请参阅测试和调整, "有效载荷电子控制模块 - 更换"。
- 重新设定时间和日期。
参考请参阅系统操作, "系统设置程序"。
预期结果:
有效载荷系统功能正常。
结果:
- 是 - 有效载荷系统功能正常。停止
Caterpillar Information System:
Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 04
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 02
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Electrical System
Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 01
2006/02/06 New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}
Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 13
Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 12
Payload Control System (PCS) 2.X MID 074 - CID 0820 - FMI 02
Payload Control System (PCS) 2.X Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X Glossary of Electrical Terms
Payload Control System (PCS) 2.X System Schematic
844H Wheel Dozer and 990H Wheel Loader Power Train Torque Converter (Lockup) - Remove
844H Wheel Dozer and 990H Wheel Loader Power Train Torque Converter (Lockup) - Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Engine Shutdown Switch Circuit - Test
2006/03/20 Three Seal Installers Available for Servicing Hand Metering Units {0732, 4312}
993K Wheel Loader Engine Oil and Filter - Change