System Schematic
这是有效载荷控制系统的简化示意图。 该示意图的电气部分都是正确的。 但是不能显示所有可能的线束接头。 某些机器上的线号和导线颜色可能不同。 关于您机器的精确示意图，请参阅电气示意图。
Show/hide table
 | |
| 图 1 | g00590833 |
Caterpillar Information System:
Payload Control System (PCS) 2.X Glossary of Electrical Terms
Payload Control System (PCS) 2.X Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X MID 074 - CID 0820 - FMI 02
Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 12
Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 08
Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 04
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 08
844H Wheel Dozer and 990H Wheel Loader Power Train Torque Converter (Lockup) - Remove
844H Wheel Dozer and 990H Wheel Loader Power Train Torque Converter (Lockup) - Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Engine Shutdown Switch Circuit - Test
2006/03/20 Three Seal Installers Available for Servicing Hand Metering Units {0732, 4312}
993K Wheel Loader Engine Oil and Filter - Change
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Throttle Position Sensor Circuit - Test
990H Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Install
525C, 535C and 545C Wheel Skidders Machine Monitor System Component Description
2006/02/13 Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
525C, 535C and 545C Wheel Skidders Machine Monitor System Features
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Angle Cylinder (Bulldozer)
Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000} Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000}