2006/02/06 Caterpillar


New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}

Usage:

769C 01X
Caterpillar Products:
  • All
  • New kits are available in order to repair cracks and threads in ductile iron. These kits can be used as a convenient alternative to welding.

    Table 1
    LOCK-N-STITCH Thread and Crack Repair    
    Part Number     Description    
    263-7140     Full Torque Thread Insert Kit    
    263-7141     Full Torque Thread Insert Kit    
    263-7142     Full Torque Thread Insert Kit    
    263-7144     Full Torque Thread Insert Kit    
    263-7145     Full Torque Thread Insert Kit    
    263-7147     LOCK-N-STITCH Kit    
    263-7146     Full Torque Thread Insert Kit    

    For more information about LOCK-N-STITCH kits, please refer to the following publications:

    • Reuse and Salvage Guidelines, SEBF8443, "Inspection and Repair Procedure for Wheels Used on Off-Highway Trucks"

    • Reuse and Salvage Guidelines, SEBF8882, "Using Lock-N-Stitch Procedures for Casting Repair"

    • Special Publication, GECJ0001, "Cat Shop Supplies and Hand Tools"

    Caterpillar Information System:

    Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 13
    Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 02
    Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 01
    Payload Control System (PCS) 2.X MID 074 - CID 0254 - FMI 13
    525C, 535C and 545C Wheel Skidders Machine Monitor System Connector Contact Description
    Payload Control System (PCS) 2.X MID 074 - CID 0254 - FMI 12
    Payload Control System (PCS) 2.X MID 074 - CID 0168 - FMI 01
    525C, 535C and 545C Wheel Skidders Machine Monitor System Self Test
    Payload Control System (PCS) 2.X MID 074 - CID 0168 - FMI 00
    Payload Control System (PCS) 2.X Diagnostic Code List
    Payload Control System (PCS) 2.X Using Service Display Mode to Determine Diagnostic Codes
    Payload Control System (PCS) 2.X Payload Control System Troubleshooting without Diagnostic Codes
    Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 01
    988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Electrical System
    Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 02
    Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 08
    Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 01
    Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 02
    Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 08
    Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 04
    Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 08
    Payload Control System (PCS) 2.X MID 074 - CID 0817 - FMI 12
    Payload Control System (PCS) 2.X MID 074 - CID 0820 - FMI 02
    Payload Control System (PCS) 2.X Payload Electronic Control Module - Replace
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.