Connector Contact Description
Show/hide table
 | |
| Illustration 1 | g01242275 |
Rear view of Instrument Cluster (37) 24 pin connector | |
The following table shows the pin numbers of the connector for the Instrument Cluster. The signal on each pin is also shown.
Show/hide table
| Contact Description Of Main Module Connector 525C, 535C, and 545C |
|
|---|---|
| Pin Number | Signal |
| 1 | + Battery |
| 2 | -Battery |
| 3 | Chassis Ground |
| 4 | Not Used |
| 5 | Not Used |
| 6 | Not Used |
| 7 | Not Used |
| 8 | Not Used |
| 9 | Not Used |
| 10 | STB - LH Turn Signal |
| 11 | STB - RH Turn Signal |
| 12 | Work Lights |
| 13 | Not Used |
| 14 | Not Used |
| 15 | STB - L14 |
| 16 | STB Park / Dimming |
| 17 | STB Input #3 |
| 18 | Not Used |
| 19 | CAN+ |
| 20 | CAN- |
| 21 | CAN Shield |
| 22 | Input #2 |
| 23 | Horn Driver |
| 24 | Key Switch Input |
Caterpillar Information System:
Payload Control System (PCS) 2.X MID 074 - CID 0254 - FMI 12
Payload Control System (PCS) 2.X MID 074 - CID 0168 - FMI 01
525C, 535C and 545C Wheel Skidders Machine Monitor System Self Test
Payload Control System (PCS) 2.X MID 074 - CID 0168 - FMI 00
Payload Control System (PCS) 2.X Diagnostic Code List
Payload Control System (PCS) 2.X Using Service Display Mode to Determine Diagnostic Codes
Payload Control System (PCS) 2.X Payload Control System Troubleshooting without Diagnostic Codes
D7R Series 2 Track-Type Tractor Hydraulic System General Information
844H Wheel Dozer Machine Systems Steering Cylinder - Remove and Install
525C, 535C and 545C Wheel Skidders Machine Monitor System Warning Operation
990H Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Remove
988H and 992K Wheel Loaders and 844H and 854K Wheel Dozers Automatic Lubrication System (Electrical Actuated System) Lubrication Pump
Payload Control System (PCS) 2.X MID 074 - CID 0254 - FMI 13
Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X MID 074 - CID 0350 - FMI 13
2006/02/06 New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}
Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 01
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Electrical System
Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X MID 074 - CID 0769 - FMI 08