Control Valve (Steering)
Show/hide table
 | |
| 图 1 | g02832278 |
Show/hide table
| 271-4967 控制阀总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 243-7112 螺栓 | 拧紧至扭矩为 20 ± 3 N·m (177 ± 27 lb in)。 |
| 2 | 2 | 8T-4185 螺栓 | 拧紧至扭矩为 60 ± 7 N·m (44 ± 5 lb ft)。 |
| 3 | 2 | 099-3649 螺栓 | 拧紧至扭矩为 20 ± 3 N·m (177 ± 27 lb in)。 |
| 4 | 1 | 100-8011 螺塞 | 拧紧至扭矩为 300 ± 40 N·m (221 ± 30lb ft)。 |
| 5 | 3 | 2S-2596 弹簧 | 在试验力下的长度为 7.9 mm (0.31 in)。 试验力为 4.226 ± 0.338 N (0.950 ± 0.076 lb)。 试验后的自由长度为 33.3 mm (1.31 in)。 |
| 6 | 1 | 8C-3325 螺栓 | 将蓝色 Loctite 242 涂抹在螺纹上。 拧紧至扭矩为 34 ± 3 N·m (301 ± 27 lb in)。 |
| 7 | 1 | 4T-1701 弹簧 | 在试验力下的长度为 59 mm (2.3 in)。 试验力为 108 ± 5 N (24 ± 1 lb)。 试验后的自由长度为 64.70 mm (2.547 in)。 |
| 8 | 1 | 4J-6806 垫片 | 根据需要使用。 厚度为 1.22 mm (0.048 in)。 |
| 9 | 1 | 112-7289 杆 | 移动杆所需的力应为 130 至 180 N (29 至 40 lb)。 释放后，杆应自由返回到保持位置。 |
| 10 | 1 | 9T-6316 弹簧 | 在试验力下的长度为 39 mm (1.5 in)。 试验力为 133.5 ± 10.6 N (30.0 ± 2.4 lb)。 试验后的自由长度为 72.3 mm (2.85 in)。 |
| 11 | 2 | 100-8012 阀体 | 拧紧至扭矩为 145 ± 15 N·m (107 ± 11 lb ft)。 |
| 12 | 1 | 4T-1860 梭阀总成 | 拧紧至扭矩为 32 ± 5 N·m (283 ± 44 lb in)。 |
| 13 | 1 | 4T-4207 节流孔螺塞 | 拧紧至扭矩为 10 ± 1 N·m (89 ± 9 lb in)。 |
Caterpillar Information System:
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Implement)
D3G, D4G and D5G Track-Type Tractors Track Roller Frame - SystemOne
2005/12/26 Improved Design For The Muffler {1062}
D7R Series 2 Track-Type Tractor Hydraulic System Piston Motor (Steering)
D7R Series 2 Track-Type Tractor Hydraulic System Pump Control Valve (Steering)
D7R Series 2 Track-Type Tractor Hydraulic System Piston Pump (Implement)
D7R Series 2 Track-Type Tractor Hydraulic System Hydraulic Tank and Filter
657G Wheel Tractor-Scraper Cushion-Hitch
D7R Series 2 Track-Type Tractor Hydraulic System Counterbalance Valve (Steering)
Service Replacement Relays Available{4493} Service Replacement Relays Available{4493}
990K Wheel Loader and 844K Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
525C, 535C and 545C Wheel Skidders Secondary Steering - Test
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Bulldozer Lift)
325D and 329D Excavators and 325D Material Handler Machine System Specifications Bucket Adjuster
D3G, D4G and D5G Track-Type Tractors Track Roller Frame - SystemOne
657G Wheel Tractor-Scraper Air System and Brakes Service Brake
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt)
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Ripper)
657G Wheel Tractor-Scraper Overflow Guard
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Winch)
D7R Series 2 Track-Type Tractor Hydraulic System Relief Valve (Main)
Installation Of Lower Scrapers On Center Tread Idlers{4159} Installation Of Lower Scrapers On Center Tread Idlers{4159}
D7R Series 2 Track-Type Tractor Hydraulic System Accumulator (Pilot)
657G Wheel Tractor-Scraper Apron