 | |
| Illustration 1 | g01232872 |
(1) Apply 9S-3263 Thread Lock Compound to the outside diameter of the seal.
(2) Apply 4C-9507 Retaining Compound to the outside diameter of ring.
(3) Torque for plug ... 70 ± 10 N·m (50 ± 7 lb ft)
(4) Use plates for proper adjustment, as required.
(5) 190-8830 Spring
- Free length ... 74 mm (2.913 inch)
- Outside diameter ... 56.3 mm (2.217 inch)
(6) Apply 4C-9507 Retaining Compound to the threads. Torque for four bolts ... 55 ± 10 N·m (40 ± 7.5 lb ft)
(7) Pressure and flow compensator valve
(8) End play of the shaft with adjusted shim pack thickness ... 0.03 ± .02 mm (0.0012 ± 0.0008 inch)
(9) 195-6930 Spring
- Free length ... 134.5 mm (5.295 inch)
- Outside diameter ... 28 mm (1.102 inch)
(10) Use shims for proper adjustment, as required.
(11) Apply 5P-3413 Sealant to the surface between the pump head and the pump housing before assembly.
(12) Torque for nine bolts ... 160 ± 30 N·m (120 ± 22 lb ft)
(13) Apply 4C-9507 Retaining Compound to the threads. Torque for two nuts ... 30 ± 7 N·m (22 ± 5 lb ft)
| Test (1) (2) | Output | Engine RPM | Pressure |
|---|---|---|---|
| Full Speed (3) | 238 L/min (63 US gpm) |
1694 | 690 kPa (100 psi) |
238 L/min (63 US gpm) |
1694 | 6900 kPa (1000 psi) |
|
| Half Speed (4) | 118 L/min (31 US gpm) |
847 | 690 kPa (100 psi) |
118 L/min (31 US gpm) |
847 | 6900 kPa (1000 psi) |
| ( 1 ) | Clockwise rotation from position C. |
| ( 2 ) | Use SAE 10W oil at 82° ± 4°C (180° ± 7°F) for any bench test. |
| ( 3 ) | Pump at 1594 rpm |
| ( 4 ) | Pump at 797 rpm |