New Rod Assembly For The Rear Access Door May Be Required {7308}
- Track-Type Tractor:
- D5N (S/N: AKD1-UP; AGG1-UP; CFH1-UP; CKT1-UP)
- D6N (S/N: CBF1-UP; CCG1-UP; ALH1-UP; CBJ1-UP; CCK1-UP; CBL1-UP; AKM1-UP; ALR1-UP; CCS1-UP; ALY1-UP)
The prop rod for the rear access door has failed on some D5N and D6N tractors. The failures occur before 10 hours of operation. The prop rods are broken or bent because access doors are left open during transportation. Replace the damaged Rod assembly with the same 240-6124 Rod Assembly if parts are required. Keep Doors Closed During Transportation.
Refer to Service Magazine, 22 March 2004, "A Retaining Cable Has Been Replaced By A Sliding Rod" for more information on the prop rod for the rear access door.
Caterpillar Information System:
990H Wheel Loader Hydraulic System Main Control Valve
D6K Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
990H Wheel Loader Hydraulic System Ride Control System
C7 Engines for Caterpillar Built Machines Flywheel
Bench Test Procedure For A 910B Wheel Loader Transmission{3030, 3073} Bench Test Procedure For A 910B Wheel Loader Transmission{3030, 3073}
D6K Track-Type Tractor Radiator Pressure Cap - Clean/Replace
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jet
990H Wheel Loader and 844H Wheel Dozer Braking System Foot Brake Control
D6K Track-Type Tractor Window Washer Reservoir - Fill
2005/10/10 Special Instruction, REHS2675, "Installation of New Position Sensors" is Available {5736}
2009/11/09 Improved Lower Hitch Bore On Engine End Frame {7057, 7100}
C27 and C32 Engines for Caterpillar Built Machines CID 0190 FMI 08 Engine Speed signal abnormal
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Ride Control System
C11 and C13 Engines Water Pump
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Main Control Valve
Removal and Installation of the 126-1774 Endbell Cover {7553} Removal and Installation of the 126-1774 Endbell Cover {7553}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0001 FMI 11 Cylinder #1 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0002 FMI 11 Cylinder #2 Injector fault
2005/10/17 New Software is Available to Add Controlled Throttle Shift Function {7620}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0003 FMI 11 Cylinder #3 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0006 FMI 11 Cylinder #6 Injector fault
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System General Information (Electrohydraulic System)