Main Circuit Breaker - 105 Amp
|
Alternator Reset (Amperes) - 105 Amp (if equipped) |
The fuse block is positioned behind the access door on the right side of the seat inside the cab.
- Remove the two screws that are on the fuse cover.
Show/hide table
Illustration 2 g01210281 - Remove the fuse cover.
| |
| Illustration 1 | g01210228 |
| NOTICE |
|---|
|
Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage could result. |
| NOTICE |
|---|
|
If it is necessary to replace fuses frequently, an electrical problem may exist. Contact your Cat dealer. |
The fuse panel is positioned behind the fuse cover on the right side of the seat inside the cab.
| |
| Illustration 3 | g02175839 |
- Replace a fuse if the element separates.
- If the fuse of a particular electrical system requires frequent replacement, check the electrical circuit.
- Repair the electrical circuit, if necessary.
|
Air Suspension Seat - 15 Amp |
|
Window Wiper - 10 Amp |
|
Ripper - 10 Amp |
|
Fan - 15 Amp Breaker |
|
12V Converter - 10 Amp |
|
Rear Window Wiper - 10 Amp |
|
Side Window Wiper - 10 Amp |
|
Dozer Blade - 15 Amp |
|
|
|
24V Converter, Panel Lights - 15 Amp |
|
Reversible Fan - 10 Amp |
|
Condenser 1 and Condenser 2 - 15 Amp Breaker |
|
Window Washer Fluid - 15 Amp |
|
Diagnostic/Service Connector - 10 Amp |
|
Horn - 10 Amp |
|
Spare |
|
Front Work Lights - 15 Amp |
|
Electronic Engine Fuel Injection - 15 Amp Breaker |
|
|
Product Link, Monitoring Display - 10 Amp |
|
Master Lighting Switch - 10 Amp |
|
Rear Work Lights - 15 Amp |
|
|
12V Converter - 10 Amp |
|
|
Engine Stop, Ignition Key - 10 Amp |
|
|
24V Converter - 15 Amp |
|
|
Dozer Blade - 15 Amp |
|
|
Dome Lamp - 10 Amp |
|
Machine ECM - 15 Amp |