Pilot Valve (Joystick) - Assemble
Assembly Procedure
- Install spring (34) .
Show/hide table
 | |
| Illustration 1 | g01148075 |
- Install sleeve (33), piston (32), spring (31), retainer (30), piston (29), O-ring seal (28), and bushing (27) .
Show/hide table
 | |
| Illustration 2 | g01148077 |
- Install piston assemblies (26) .
Show/hide table
 | |
| Illustration 3 | g01148074 |
- Install plate (25) .
Show/hide table
 | |
| Illustration 4 | g01148073 |
- Install swivel (24) .
Show/hide table
 | |
| Illustration 5 | g01148072 |
Show/hide table
 |
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
 |
- Install springs (23) .
Show/hide table
 | |
| Illustration 6 | g01148071 |
- Install O-ring seals (22) .
Show/hide table
 | |
| Illustration 7 | g01148069 |
- Install O-ring seal (21) .
Show/hide table
 | |
| Illustration 8 | g01148070 |
- Install housing (20) and bolt (19) .
Show/hide table
 | |
| Illustration 9 | g01148068 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Install lever (18), washer (17), and nut (16) .
Show/hide table
 | |
| Illustration 10 | g01148067 |
- Install bolt (15) and switch (14) .
Show/hide table
 | |
| Illustration 11 | g01148064 |
- Install cover (13) and screw (12) .
Show/hide table
 | |
| Illustration 12 | g01148062 |
- Install boot (11), retainer (10), nut (9), and nut (7) .
Show/hide table
 | |
| Illustration 13 | g01148060 |
- Install handle assembly (8) .
Show/hide table
 | |
| Illustration 14 | g01148059 |
- Tighten nut (7) .
- Install switch (6) and bolt (5) .
Show/hide table
 | |
| Illustration 15 | g01148058 |
- Install plate (3), bolts (2), and cable strap (4) .
Show/hide table
 | |
| Illustration 16 | g01148057 |
- Install cable strap (1) .
Show/hide table
 | |
| Illustration 17 | g01148056 |
End By: Install the valve. Refer to Disassembly and Assembly, "Pilot Valve (Joystick) - Install".
Caterpillar Information System:
904B Wheel Loader Machine Systems Pilot Valve (Joystick) - Disassemble
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Electrical Power Supply Circuit - Test
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Remove
994F Wheel Loader Hydraulic System Relief Valve (Pilot)
994F Wheel Loader Power Train MID 081 - CID 0138 - FMI 04
994F Wheel Loader Hydraulic System Gear Pump (Pilot System) (Hydraulic Oil Cooler)
631G Wheel Tractor-Scraper Sound Information and Vibration Information
994F Wheel Loader Braking System Piston Pump (Brake) Pressure - Test and Adjust
C27 and C32 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
994F Wheel Loader Power Train MID 081 - CID 0138 - FMI 03
994F Wheel Loader Hydraulic System Pilot Hydraulic System
994F Wheel Loader Hydraulic System MID 082 - CID 0168 - FMI 01
C27 and C32 Generator Set Engines Rocker Arm and Shaft - Install
2005/03/07 260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
631G Wheel Tractor-Scraper Plate Locations and Film Locations
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Hydraulic Oil Cooler - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Trunnion - Remove and Install
2005/04/25 Improvements Have Been Made to the Freewheel Stator {3101, 3129, 7610, 7620}
904B Compact Wheel Loader Plate Locations and Film Locations
904B Compact Wheel Loader Emissions Certification Film
904B Compact Wheel Loader Engine Starting with Jump Start Cables
904B Compact Wheel Loader Alternate Exit
904B Compact Wheel Loader Lifting and Tying Down the Machine
904B Compact Wheel Loader Machine Retrieval