Air Cleaner - Remove and Install
Removal Procedure
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Open door assembly (1) .
Show/hide table
Illustration 1 | g01108581 |
RH side |
- Loosen clamp (2). Disconnect hose (3) .
Show/hide table
Illustration 2 | g00976058 |
- Unlatch clamps (4) and remove the air cleaner cover (5) .
Show/hide table
Illustration 3 | g00976263 |
- Remove primary filter element (6) and secondary filter element (8) from air cleaner housing (7) .
Show/hide table
Illustration 4 | g00976280 |
Show/hide table
Illustration 5 | g00976292 |
- Open door assembly (9) .
Show/hide table
Illustration 6 | g01108582 |
LH side |
- Disconnect tube (11) .
Show/hide table
Illustration 7 | g01108583 |
- Loosen hose clamp (10). Disconnect air outlet hose (13) .
- Remove mounting bolts (12) that hold air cleaner housing (7) into position.
- Remove air cleaner housing (7) .
Installation Procedure
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Position air cleaner housing (7) in the proper location, as shown.
Show/hide table
Illustration 8 | g01108583 |
- Install mounting bolts (12) in order to secure air cleaner housing (7) into position.
- Connect air outlet hose (13) to air cleaner housing (7) and tighten hose clamp (10) .
- Connect tube (11) .
- Close door assembly (9) .
Show/hide table
Illustration 9 | g01108582 |
LH side |
- Install secondary filter element (8) and primary filter element (6) in air cleaner housing (7) .
Show/hide table
Illustration 10 | g00976280 |
Show/hide table
Illustration 11 | g00976292 |
- Install air cleaner cover (5) and latch clamps (4) .
Show/hide table
Illustration 12 | g00976263 |
- Connect hose (3). Tighten clamp (2) in order to secure hose.
Show/hide table
Illustration 13 | g00976058 |
- Close door assembly (1) .
Show/hide table
Illustration 14 | g01108581 |
RH side |
Caterpillar Information System:
930G Wheel Loader Engine Supplement Turbocharger - Install
930G Wheel Loader Engine Supplement Turbocharger - Remove
Cat® Digital Voltage Regulator Parameter Viewing and Configuration (Caterpillar Electronic Technician)
966H and 972H Wheel Loaders Transmission Oil Sample - Obtain
D9T Track-Type Tractor Engine Supplement Radiator Guard - Tilt Back
D8R and D8T TRACK-TYPE TRACTORS Machine Systems Push Arm
2004/09/27 A New Implement Pump is Now Used {5055, 5073, 5084}
D10T Track-Type Tractor Power Train Track Roller - Remove
D8T Track-Type Tractor Hydraulic System Quick-Drop Valve
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Pressure Reducing Valve (Pilot)
966H and 972H Wheel Loaders Reference Material
D9R Track-Type Tractor Power Train Final Drive and Brake - Install
980H Wheel Loader Power Train Output Transfer Gears - Disassemble
D9T Track-Type Tractor Power Train Flywheel Lubrication Oil Pressure - Test
D10T, D11T, D8T and D9T Track-Type Tractors Monitoring System Menu Navigation
930G Wheel Loader Engine Supplement Muffler - Remove and Install
930G Wheel Loader Engine Supplement Starting Aid (Air Inlet Heater) - Remove and Install
627G Wheel Tractor-Scraper Wheel Scraper Power Train Torque Converter
2004/09/27 An Improved Alternator Is Now Used {1405}
2004/10/18 An Improved Spring is Now Used in the Ripper Control {5063}
AD30 Underground Articulated Truck Machine Systems Brake Control Valve (Parking) - Install
AD45B Underground Articulated Truck Machine Systems Seat - Remove and Install
D8T, D9T, D10T and D11T Track-Type Tractors MID 113 - CID 1582 - FMI 04
D10T Track-Type Tractor Power Train Track Roller - Install