Updated Ejector Lines Group Improves Retention of the Ejector Lines {5057, 6203}
- Wheel Tractor-Scraper:
- 623F (S/N: 6BK1-UP; 5EW1-UP)
- 623G (S/N: CES1-UP; ARW1-UP)
Description of Change: New clips and new grommets are used in the updated 8I-1625 Ejector Lines Gp. The new hardware improves the service life of the ejector tubes.
Adaptable To: The new 5P-7464 Clips (1), the new 5P-7465 Clips (2), and the new 6V-7359 Grommets (3) are direct replacement for the former 7S-3916 Clips and the former 7S-3919 Clips. The new hardware is effective with 623G (S/N: CES450-UP). The new hardware is adaptable to all earlier machines. Refer to the illustration for the locations of the new hardware.
Note: Replace the clips on both sides of the machine.
Show/hide table
Illustration 1 | g01062971 |
Typical location of new hardware |
Caterpillar Information System:
D6N Track-Type Tractor Machine Systems Pilot Control Valve - Disassemble
992G Wheel Loader Electrohydraulic System Hydraulic Oil Contamination - Test
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
AD30 Underground Articulated Truck Braking System Brake Disc Wear - Check
980H Wheel Loader Transmission Oil Sample - Obtain
2004/04/12 Internal Changes Improve the Nitrogen Retention of the Accumulators {5077}
980H Wheel Loader Transmission Oil Filter - Replace
D6N Track-Type Tractor Machine Systems Pilot Control Valve - Install
992G Wheel Loader Plate Locations and Film Locations
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Connect
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Separate
980H Wheel Loader Diagnostic Lines (Remote Pressure Taps) - If Equipped
980H Wheel Loader Battery - Clean
AccuGrade Laser System Bank Valve (Grade Control)
AccuGrade Laser System Counterbalance Valve (Grade Control)
AccuGrade Laser System Counterbalance Valve (Grade Control) - Test and Adjust
2004/07/01 A New Screen is Used in the 1L-2073 Pressure Reducing Valve {1462}
980H Wheel Loader Radiator Core - Clean
2004/03/22 Provide Proper Documentation of Returned Parts within the Warranty Claim {1000}
2004/05/01 Provide Proper Documentation of Returned Parts within the Warranty Claim {1000}
SCJ and 8SC Series Alternators General Information
Replacement of Vane Type Implement Pump with Gear Pump.{5055, 5084} Replacement of Vane Type Implement Pump with Gear Pump.{5055, 5084}
854G Wheel Dozer Plate Locations and Film Locations
C13, C15, and C18 Tier 4 Final Engines Flywheel