Check Valve (Air Tank)
Show/hide table
 | |
| Illustration 1 | g01058021 |
(2) Torque for two check valves ... 40 N·m (30 lb ft)
Apply 5P-3413 Pipe Sealant to the threads before installation.
Note: Access check valves (2) through plug ports (1). Use a 7/8 inch deep well socket that is secured to an extension in order to remove check valves (2).
Caterpillar Information System:
854G Wheel Dozer Capacities (Refill)
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 04 Injector Actuation Pressure voltage low
854G Wheel Dozer Equipment Lowering with Engine Stopped
992G Wheel Loader and 854G Wheel Dozer Power Train Backup Alarm Always Off
D6N Track-Type Tractor Machine Systems Pilot Control Valve - Remove
992G Wheel Loader and 854G Wheel Dozer Power Train Backup Alarm Always On
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bucket - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bucket - Remove
980H Wheel Loader Stopping the Engine if an Electrical Malfunction Occurs
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Hydraulic Manifold (Brake Accumulator) - Remove and Install
992G Wheel Loader and 854G Wheel Dozer Power Train Connector Locations
980H Wheel Loader Hood Tilt
992G Wheel Loader Automatic Lubrication System Components - Check
980H Wheel Loader Cooling System Coolant Sample (Level 1) - Obtain
980H Wheel Loader Cooling System Coolant Sample (Level 2) - Obtain
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
966G II and 972G II Wheel Loaders Aggregate Autodig - If Equipped
950G Series II Wheel Loader Safety
992G Wheel Loader and 854G Wheel Dozer Power Train General Information
545 Wheel Skidder Machine Systems Hydraulic Rotator - Assemble - Continuous Rotator Grapple
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0041 - FMI 04
980H Wheel Loader Diagnostic Lines (Remote Pressure Taps) - If Equipped
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Separate
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Connect