AD55 Underground Articulated Truck Caterpillar


Engine Mounts - Inspect

Usage:

AD55 ANW



Illustration 1g01009999



Illustration 2g01010000

Caterpillar recommends inspecting the engine mounts for deterioration and for proper bolt torque. This will help to prevent excessive engine vibration that is caused by improper mounting.

Reference: For the proper bolt torques for the engine mounts, refer to Specifications Supplement, "AD55 Engine" for the machine that is being serviced.

Caterpillar Information System:

2003/07/28 New Flash Files are Available for Improved Starting in Cold Weather {7610, 7620}
D3G, D4G and D5G Track-Type Tractors Reference Material
D3G, D4G and D5G Track-Type Tractors Daily Inspection
963C Track-Type Loader Machine Systems Main Control Valve - Install
G3500 Engines Duplex Oil Filter - Adjust
994D Wheel Loader Safety Messages
2003/08/01 New Fabricated Tool for Piston Pin Installation {1225}
2003/07/28 New Fabricated Tool for Piston Pin Installation {1225}
AD55 Underground Articulated Truck Engine Air Precleaner - Clean
AD55 Underground Articulated Truck Engine Air Filter Secondary Element - Replace
AD55 Underground Articulated Truck Engine Air Filter Primary Element - Clean/Replace
AD55 Underground Articulated Truck Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
AD55 Underground Articulated Truck Engine Oil Level - Check
3034 Engine for Caterpillar Built Machines Valve Guide - Inspect
Cat® Digital Voltage Regulator Remote Communication
D3G, D4G and D5G HYSTAT Track-Type Tractors Electrohydraulic Power Train Systems Relays
2003/06/30 Information Is Available on the Correct Flash Files for the Wheel Feller Bunchers and the Wheel Skidders {7620}
D3G, D4G and D5G HYSTAT Track-Type Tractors Electrohydraulic Power Train Systems Solenoid Valves
2003/07/21 An Adjustment Procedure is Available for the Left Brake Pedal Assembly {4269}
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Install
3176C, 3196 and 3406E Engines for Caterpillar Built Machines CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
2003/06/30 Quality of Remanufactured Camshafts {1210}
2003/07/28 New Air Cleaner For the Engine is Now Used {1051}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.