Power Guard Actuator
Show/hide table
 | |
| Illustration 1 | g01019022 |
(A) Stroke for the actuator ... 304.8 ± 1.3 mm (12.00 ± 0.05 inch)
Voltage for the actuator ... 24 VDC
Load capacity ... 454 kg (1000 lb)
Current draw at full load ... 7 Amperes
Maximum end play ... 1.14 mm (0.045 inch)
Operating temperature is between -26 °C (-15 °F) and 65 °C (150 °F).
Caterpillar Information System:
953C Track-Type Loader Cooling System Extended Life Coolant - Change
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
CAES Installation For Wheel Tractor Scraper{7604} CAES Installation For Wheel Tractor Scraper{7604}
CAES Installation For Wheel Loader{7604} CAES Installation For Wheel Loader{7604}
953C Track-Type Loader Engine Starting with Jump Start Cables
D6N Track-Type Tractor Power Train Axle - Remove and Install
D6N Track-Type Tractor Power Train Steering Differential and Brake - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Hydraulic System Troubleshooting
3054E Industrial Engine Flywheel - Install
938G Wheel Loader and IT38G Integrated Toolcarrier Reference Material
938G Wheel Loader and IT38G Integrated Toolcarrier Seat
963C Track-Type Loader Power Train Transmission Stall - Test
953C Track-Type Loader Cooling System Water Temperature Regulator - Clean/Replace
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Toggle Switch (Power Guard Actuator)
953C Track-Type Loader Engine Oil Sample - Obtain
AD30 Underground Articulated Truck Hydraulic System Oil Level - Check
AD30 Underground Articulated Truck Service Inspection
AD30 Underground Articulated Truck Hydraulic Tank Breaker Relief Valve - Clean
AD30 Underground Articulated Truck Indicators and Gauges - Test
D6N Track-Type Tractor Power Train Steering Differential and Brake - Disassemble
953C Track-Type Loader Fuel Tank Cap and Strainer - Clean
D6N Track-Type Tractor Power Train Final Drive, Steering Differential, and Brake (Left Side) - Remove
D6N Track-Type Tractor Power Train Final Drive, Steering Differential, and Brake (Left Side) - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Machine Monitor System Module - Replace