Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | FT-2551 | Axle Removal Tool | 1 |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove bolts (1) and cover (2).
Show/hide table
Illustration 2 g00871054 Show/hide tableIllustration 3 g00871057 - Use Tooling (A) to remove outer axle (3). Use Tooling (A) to remove inner axle (4).
Note: There are two axles on the left side of the machine and one axle on the right side of the machine.
Illustration 1 | g00870292 |
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | FT-2551 | Axle Removal Tool | 1 |
B | 369–9451 | Petro Gel Amber Grease | 1 |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Apply Tooling (B) at locations (X).
Note: Remove all burrs from axles (4) before applying Tooling (B).
Show/hide tableIllustration 7 g00871057 Show/hide tableIllustration 8 g00871054 - Use Tooling (A) to install inner axle (4). Use Tooling (A) to install outer axle (3).
Note: There are two axles on the left side of the machine and one axle on the right side of the machine.
Show/hide tableIllustration 9 g00870292 - Install cover (2) and bolts (1).
Illustration 4 | g06120222 |
Illustration 5 | g06120218 |
Illustration 6 | g06120210 |