3126B Petroleum Engine Caterpillar


Air Shutoff - Remove

Usage:

3126B Z2A

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01184778

  1. Remove bolts (3) and retainers (4) .

  1. Disconnect tube assembly (1) from air shutoff housing (5) .

  1. Remove O-ring seals (2) .

  1. Remove bolts (6) and air shutoff housing (5) .

  1. Remove O-ring seal (7) .

Caterpillar Information System:

C32 Petroleum Engines Aftercooler - Install
C18 Petroleum Generator Sets Engine Warm-up
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Mode Selection Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0100 FMI 04
C13 and C15 On-highway Engines Fuel Temperature Is High
3126B Petroleum Engine Electronic Control Module - Remove and Install
2005/08/22 Troubleshooting Column-Type Fuel Level Senders {5574, 7481}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251} Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0100 FMI 03
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0041 FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0041 FMI 03
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Refrigerant Condenser - Remove and Install
C15 Generator Sets Model View Illustrations
C18 Generator Sets Plate Locations and Film Locations
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Refrigerant Compressor - Remove and Install
C7 and C9 On-Highway Engines Sensor Signal (Analog, Active) - Test
C13 and C15 On-highway Engines Sensor Signal (Analog, Active) - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0100 FMI 10
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0110 FMI 03
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0110 FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0168 FMI 00
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0168 FMI 01
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0168 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Digital Throttle Position Sensor Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.