C18 Petroleum Generator Sets Caterpillar

Engine Warm-up

Usage:

C18 PEE

Jalankan engine pada beban yang ringan selama tiga sampai lima menit, atau jalankan engine pada beban yang ringan sampai temperatur cairan pendingin mantel air mulai naik. Waktu pemanasan yang lebih lama mungkin diperlukan sewaktu temperatur ambien berada di bawah −18 °C (0 °F).

Periksa semua tampilan led indikator selama periode pemanasan.

Lakukan pemeriksaan keliling. Periksa engine terhadap adanya kebocoran cairan dan kebocoran udara. Engine dapat dioperasikan pada peringkat rpm penuh dan pada beban penuh sewaktu temperatur oli engine telah mencapai 60° C (140° F).

Caterpillar Information System:

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Mode Selection Circuit - Test

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0100 FMI 04

C13 and C15 On-highway Engines Fuel Temperature Is High

3126B Petroleum Engine Electronic Control Module - Remove and Install

2005/08/22 Troubleshooting Column-Type Fuel Level Senders {5574, 7481}

Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251} Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0100 FMI 03

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0041 FMI 04

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0041 FMI 03

345C MHPU Mobile Hydraulic Power Unit Engine Supplement Refrigerant Condenser - Remove and Install

C4.4 and C6.6 Engines for Caterpillar Built Machines CID 1639 FMI 09

C15 On-Highway Engine Engine Valve Lash - Inspect/Adjust

C32 Petroleum Engines Aftercooler - Install

3126B Petroleum Engine Air Shutoff - Remove

C15 Generator Sets Model View Illustrations

C18 Generator Sets Plate Locations and Film Locations

345C MHPU Mobile Hydraulic Power Unit Engine Supplement Refrigerant Compressor - Remove and Install

C7 and C9 On-Highway Engines Sensor Signal (Analog, Active) - Test

C13 and C15 On-highway Engines Sensor Signal (Analog, Active) - Test

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0100 FMI 10

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0110 FMI 03

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0110 FMI 04

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0168 FMI 00

C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0168 FMI 01